AMC1311DWV vs AMC1302DWV

Dieser detaillierte Vergleich von AMC1311DWV und AMC1302DWV bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AMC1311DWV and AMC1302DWV share the same isolated amplifier architecture, SOIC-8 (DWV) package, and 5.0 kV reinforced isolation rating, making them functionally interchangeable in many designs. However, the AMC1302DWV offers a ±50 mV input range with fixed gain of 41, while the AMC1311DWV provides a ±1 V input range with unity gain, so signal-chain scaling and input filtering must be re-validated before substitution.

Package Type High match
Isolation Rating High match
Input Voltage Range Validation required
Fixed Gain Not compatible

Parts at a glance

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AMC1311DWV AMC1302DWV Why it matters
Input Voltage Range ±1 V (2 V full-scale) ±50 mV (50 mV full-scale) Defines the maximum differential signal the isolated amplifier can accept; the AMC1311 suits high-voltage sensing while the AMC1302 suits shunt-based current sensing.
Input Resistance ~1 GΩ (high impedance) ~22 kΩ (low impedance) Determines loading on the sensed node; high input impedance allows direct high-voltage divider sensing, while low impedance is intended for shunt current measurement.
Gain 1 V/V (unity) 41 V/V (fixed) Sets the signal scaling from input to output; unity gain suits voltage sensing, while high gain amplifies small shunt voltages for current sensing.
Input Offset Voltage (max) ±1.5 mV ±50 µV Affects DC accuracy; the much lower offset of the AMC1302 is critical for precise low-level shunt current measurement.
Input Offset Drift (max) ±10 µV/°C ±0.5 µV/°C Governs offset stability over temperature; lower drift improves measurement accuracy across the operating range.
Gain Error (max) ±0.3% ±0.2% Represents gain accuracy; tighter gain error yields more accurate scaled output and better system-level precision.
Input Bandwidth ~1 MHz ~1 MHz Determines the maximum signal frequency that can be accurately amplified; both support similar bandwidth for control-loop sensing.
Isolation Rating 5 kV RMS (reinforced) 5 kV RMS (reinforced) Specifies the galvanic isolation barrier strength; both provide reinforced isolation suitable for high-voltage industrial systems.
Supply Voltage 3.0 V to 5.5 V (both sides) 3.0 V to 5.5 V (both sides) Defines the operating supply range; identical ranges allow drop-in compatibility for power supply design.
Package 8-pin SOIC (DWV) 8-pin SOIC (DWV) Identical package and pinout enable direct PCB footprint compatibility between the two devices.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AMC1311DWV AMC1302DWV
Supplier - Texas Instruments
Part Status Active Active
Type Isolation Isolation
Applications - Current Sensing, Power Management
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary functional differences between the AMC1311DWV and AMC1302DWV?

The AMC1311DWV is a precision, isolated voltage-sensing amplifier designed for high-impedance voltage measurements, while the AMC1302DWV is an isolated current-sensing amplifier optimized for shunt-based current measurement. The AMC1311DWV features a high input impedance (typically 1 GΩ) suitable for direct voltage sensing, whereas the AMC1302DWV has a low input impedance designed for connection across a shunt resistor.

Are the AMC1311DWV and AMC1302DWV pin-to-pin compatible?

Yes, both devices are offered in the same 8-pin SOIC (DWV) package with identical pinout assignments for the isolated amplifier family, allowing them to share a common PCB footprint. However, pin-to-pin compatibility does not guarantee functional interchangeability, as the input structures and signal conditioning differ.

What are the input voltage ranges for the AMC1311DWV and AMC1302DWV?

The AMC1311DWV is specified for a linear input voltage range of ±1 V (with a full-scale range of ±1 V) for voltage sensing. The AMC1302DWV is specified for a linear input voltage range of ±50 mV for current sensing across a shunt resistor. These differing input ranges mean the devices are not directly interchangeable without redesigning the input network.

Do both devices provide the same isolation rating?

Both the AMC1311DWV and AMC1302DWV are reinforced isolated amplifiers rated for 5 kV RMS isolation (per UL 1577) and offer a working voltage of 1.5 kV DC. They share the same isolation barrier technology and certification qualifications, making them equivalent in terms of safety isolation performance.

Can the AMC1311DWV be used for current sensing and the AMC1302DWV for voltage sensing?

No, they are not recommended for cross-application. The AMC1311DWV has a high-impedance input intended for voltage sensing and is not optimized for the low-level differential signals produced by a shunt resistor. The AMC1302DWV has a low-impedance input designed for shunt current sensing and would load a high-impedance voltage source, causing measurement error. Each device should be used for its intended sensing function.

What are the typical gain and output characteristics of each device?

The AMC1311DWV provides a fixed gain of 1 V/V with a differential output of ±1 V corresponding to its ±1 V input range. The AMC1302DWV provides a fixed gain of 41 V/V, producing a ±2.05 V differential output for its ±50 mV input range. Both devices output a differential signal suitable for driving a delta-sigma modulator or ADC.

Are the AMC1311DWV and AMC1302DWV qualified to the same industrial temperature range?

Yes, both devices are specified for an operating ambient temperature range of –40°C to +125°C, making them suitable for industrial applications requiring wide temperature operation. They also share the same supply voltage requirements for both the high-side and low-side supplies.