Abbildungen dienen nur als Referenz
M24C16-DRMN3TP/K
+StücklisteIC EEPROM 16KBIT I2C 8SOIC
-
HerstellerSTMikroelektronik
-
Herstellerteil #M24C16-DRMN3TP/K
-
Datenblatt M24C16-DRMN3TP/K DataSheet
-
Auf Lager5421
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Part Status | Active |
| Base Product Number | M24C16 |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | EEPROM |
| Technology | EEPROM |
| Memory Size | 16Kbit |
| Memory Organization | 2K x 8 |
| Memory Interface | I2C |
| Clock Frequency | 1 MHz |
| Write Cycle Time - Word, Page | 4ms |
| Voltage - Supply | 1.7V ~ 5.5V |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
| Package | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
| Access Time | 450 ns |
| Grade | Automotive |
| Qualification | AEC-Q100 |
Übersicht
Description
The M24C16-DRMN3TP/K is a 16 Kb (kilobit) serial Electrically Erasable Programmable Read-Only Memory (EEPROM) from STMicroelectronics. It is organized as 2,048 × 8 bits and communicates via an I²C interface, which is a two-wire serial protocol. This EEPROM is designed to operate over a wide range of supply voltages, typically from 1.7V to 5.5V, making it suitable for a variety of applications.
Key features include a low power consumption and the ability to perform byte and page write operations, with a page size of up to 16 bytes. The M24C16-DRMN3TP/K is known for its reliability and endurance, capable of over one million write cycles and data retention of more than 40 years. It also supports random and sequential read modes and comes with write protection features to safeguard data integrity.
This device is suitable for use in consumer electronics, industrial, and communication systems, where non-volatile memory is required. Its small size and robust performance make it ideal for embedded systems and applications where space and power are constrained.
Key features include a low power consumption and the ability to perform byte and page write operations, with a page size of up to 16 bytes. The M24C16-DRMN3TP/K is known for its reliability and endurance, capable of over one million write cycles and data retention of more than 40 years. It also supports random and sequential read modes and comes with write protection features to safeguard data integrity.
This device is suitable for use in consumer electronics, industrial, and communication systems, where non-volatile memory is required. Its small size and robust performance make it ideal for embedded systems and applications where space and power are constrained.
Equivalent
The M24C16-DRMN3TP/K is a 16Kb I2C EEPROM from STMicroelectronics. Equivalent products include:
1. Atmel/Microchip 24LC16B
2. Microchip 24AA16
3. ON Semiconductor CAT24C16
4. ROHM BR24G16
5. NXP Semiconductors PCA24S16
These alternatives provide similar memory capacity and I2C interface support, suitable for comparable applications. Always check the datasheet to ensure compatibility with specific requirements.
1. Atmel/Microchip 24LC16B
2. Microchip 24AA16
3. ON Semiconductor CAT24C16
4. ROHM BR24G16
5. NXP Semiconductors PCA24S16
These alternatives provide similar memory capacity and I2C interface support, suitable for comparable applications. Always check the datasheet to ensure compatibility with specific requirements.
Features
The M24C16-DRMN3TP/K is a 16-Kbit serial EEPROM memory device produced by STMicroelectronics. It operates on an I2C bus interface, supporting fast-mode (up to 400 kHz) and standard-mode (100 kHz) data transfer rates. The EEPROM has a memory organization of 2,048 x 8 bits, offering a flexible data storage solution.
Key features include:
1. Wide Voltage Range: Operates from 1.7V to 5.5V, making it suitable for a variety of applications.
2. Page Write: Supports up to 16 bytes per page, enhancing data writing efficiency.
3. Data Retention: Offers high data reliability with retention typically exceeding 40 years.
4. Endurance: Guaranteed for a high number of write/erase cycles (up to 1 million).
5. Low Power Consumption: Features a standby current of less than 1 µA.
6. Temperature Range: Operates in the industrial temperature range from -40°C to +85°C.
The M24C16-DRMN3TP/K is housed in a 8-pin TSSOP package, ensuring ease of integration into compact electronic designs.
Key features include:
1. Wide Voltage Range: Operates from 1.7V to 5.5V, making it suitable for a variety of applications.
2. Page Write: Supports up to 16 bytes per page, enhancing data writing efficiency.
3. Data Retention: Offers high data reliability with retention typically exceeding 40 years.
4. Endurance: Guaranteed for a high number of write/erase cycles (up to 1 million).
5. Low Power Consumption: Features a standby current of less than 1 µA.
6. Temperature Range: Operates in the industrial temperature range from -40°C to +85°C.
The M24C16-DRMN3TP/K is housed in a 8-pin TSSOP package, ensuring ease of integration into compact electronic designs.
Pinout
The M24C16-DRMN3TP/K is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. It has a pin count of 8. The functions of these pins are as follows:
1. A0, A1, A2: These are address pins used for device selection. They allow for up to eight devices to be on the same I²C bus.
2. VSS: Ground pin for the device.
3. SDA (Serial Data): This pin is used for the bidirectional data transfer between the microcontroller and the EEPROM.
4. SCL (Serial Clock): This pin is used to synchronize the data transfer between the microcontroller and the EEPROM.
5. WP (Write Protect): This pin is used to protect the EEPROM from inadvertent writes. When this pin is connected to VCC, the write protection is enabled.
6. VCC: Supply voltage for the device.
These pins enable the M24C16 to perform its function as a non-volatile memory device interfacing over the I²C bus, allowing for data storage and retrieval operations.
1. A0, A1, A2: These are address pins used for device selection. They allow for up to eight devices to be on the same I²C bus.
2. VSS: Ground pin for the device.
3. SDA (Serial Data): This pin is used for the bidirectional data transfer between the microcontroller and the EEPROM.
4. SCL (Serial Clock): This pin is used to synchronize the data transfer between the microcontroller and the EEPROM.
5. WP (Write Protect): This pin is used to protect the EEPROM from inadvertent writes. When this pin is connected to VCC, the write protection is enabled.
6. VCC: Supply voltage for the device.
These pins enable the M24C16 to perform its function as a non-volatile memory device interfacing over the I²C bus, allowing for data storage and retrieval operations.
Manufacturer
The M24C16-DRMN3TP/K is manufactured by STMicroelectronics. STMicroelectronics is a global semiconductor company, known for designing, developing, and manufacturing a broad range of electronic components and systems. The company operates in various sectors, including automotive, industrial, personal electronics, communications equipment, and Internet of Things (IoT) applications. STMicroelectronics is recognized for its expertise in semiconductor technologies and its ability to deliver innovative solutions that cater to the needs of different industries.
Application
The M24C16-DRMN3TP/K is a 16-Kbit I2C-compatible serial EEPROM used in various applications. Key areas include:
1. Consumer Electronics: Storing user settings and configurations for TVs, audio equipment, and remote controls.
2. Industrial Control: Data logging and parameter storage for programmable logic controllers (PLCs) and industrial sensors.
3. Automotive Systems: Non-volatile data storage for engine control units (ECUs) and infotainment systems.
4. Medical Devices: Configuration and calibration data storage in devices like blood glucose meters.
5. Computer Peripherals: Configuration and firmware storage in printers and networking equipment.
6. Smart Cards and RFID: Secure data storage for identification and authentication purposes.
These applications leverage the EEPROM's non-volatile memory, low power consumption, and reliable data retention.
1. Consumer Electronics: Storing user settings and configurations for TVs, audio equipment, and remote controls.
2. Industrial Control: Data logging and parameter storage for programmable logic controllers (PLCs) and industrial sensors.
3. Automotive Systems: Non-volatile data storage for engine control units (ECUs) and infotainment systems.
4. Medical Devices: Configuration and calibration data storage in devices like blood glucose meters.
5. Computer Peripherals: Configuration and firmware storage in printers and networking equipment.
6. Smart Cards and RFID: Secure data storage for identification and authentication purposes.
These applications leverage the EEPROM's non-volatile memory, low power consumption, and reliable data retention.
Package
The M24C16-DRMN3TP/K is a 16 Kb serial I2C bus EEPROM manufactured by STMicroelectronics. It typically comes in a SO8N (Small Outline 8 leads, narrow body) package, which is suitable for surface mount technology.
