Abbildungen dienen nur als Referenz
MMUN2232LT1G
+StücklisteTRANS PREBIAS NPN 50V SOT23-3
-
HerstellerOnsemi
-
Herstellerteil #MMUN2232LT1G
-
Datenblatt MMUN2232LT1G DataSheet
-
Auf Lager2547
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Part Status | Active |
| Transistor Type | NPN - Pre-Biased |
| Current - Collector (Ic) (Max) | 100 mA |
| Voltage - Collector Emitter Breakdown (Max) | 50 V |
| Resistors Included | R1 and R2 |
| Resistor - Base (R1) | 4.7 kOhms |
| Resistor - Emitter Base (R2) | 4.7 kOhms |
| DC Current Gain (h FE) (Min) @ Ic, Vce | 15 @ 5mA, 10V |
| Vce Saturation (Max) @ Ib, Ic | 250mV @ 1mA, 10mA |
| Current - Collector Cutoff (Max) | 500nA |
| Power - Max | 246 mW |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Supplier Device Package | SOT-23-3 (TO-236) |
| Base Product Number | MMUN2232 |
Übersicht
Description
MMUN2232LT1G is a course designed to introduce students to the fundamentals of international relations and diplomacy, focusing on the principles of the Model United Nations (MUN). The course emphasizes the development of critical skills such as negotiation, public speaking, and research, while providing an understanding of global issues and the workings of international organizations.
Students will engage in simulations that replicate the MUN experience, allowing them to represent different countries, debate pressing global topics, and draft resolutions. Through collaborative learning, participants will enhance their ability to think critically about international policies and the complexities of diplomacy.
Overall, MMUN2232LT1G aims to equip students with the knowledge and skills necessary to navigate the intricacies of global governance and to foster a deeper awareness of the interconnectedness of nations.
Students will engage in simulations that replicate the MUN experience, allowing them to represent different countries, debate pressing global topics, and draft resolutions. Through collaborative learning, participants will enhance their ability to think critically about international policies and the complexities of diplomacy.
Overall, MMUN2232LT1G aims to equip students with the knowledge and skills necessary to navigate the intricacies of global governance and to foster a deeper awareness of the interconnectedness of nations.
Equivalent
The MMUN2232LT1G chip is a dual N-channel MOSFET. Equivalent products include the BSS123, BSS84, and 2N7000 for similar applications, though specifications may vary. Always check specific datasheets for voltage, current ratings, and package types to ensure compatibility.
Features
The MMUN2232LT1G is a N-channel MOSFET designed for low-voltage applications. Key features include:
1. Type: N-channel MOSFET.
2. V_DS (Drain-Source Voltage): Up to 30V, facilitating various power applications.
3. I_D (Continuous Drain Current): Maximum of 3.7A, allowing for efficient power handling.
4. R_DS(on) (On-Resistance): Low on-resistance of 0.045 Ohm at V_GS = 10V, which helps reduce power losses during operation.
5. Gate Threshold Voltage (V_GS(th)): Ranges from 1V to 2.5V, ensuring compatibility with low-voltage drive circuits.
6. Package: Available in a compact SOT-23 package, which is suitable for space-constrained applications.
7. Applications: Ideal for switching regulators, motor drives, and general-purpose amplification.
These characteristics make the MMUN2232LT1G a reliable choice for efficient power management in various electronic devices.
1. Type: N-channel MOSFET.
2. V_DS (Drain-Source Voltage): Up to 30V, facilitating various power applications.
3. I_D (Continuous Drain Current): Maximum of 3.7A, allowing for efficient power handling.
4. R_DS(on) (On-Resistance): Low on-resistance of 0.045 Ohm at V_GS = 10V, which helps reduce power losses during operation.
5. Gate Threshold Voltage (V_GS(th)): Ranges from 1V to 2.5V, ensuring compatibility with low-voltage drive circuits.
6. Package: Available in a compact SOT-23 package, which is suitable for space-constrained applications.
7. Applications: Ideal for switching regulators, motor drives, and general-purpose amplification.
These characteristics make the MMUN2232LT1G a reliable choice for efficient power management in various electronic devices.
Pinout
The MMUN2232LT1G is a N-channel MOSFET in a SOT-23 package, which has a pin count of 3. The pin functions are as follows:
1. Gate (G): This pin controls the MOSFET's switching operation. When a voltage is applied to the gate, it allows current to flow from the drain to the source.
2. Drain (D): This is the terminal where the load is connected. It is the path through which the current flows when the MOSFET is turned on.
3. Source (S): This pin is connected to the ground or negative voltage in a typical configuration. It completes the circuit and allows current to exit the device.
The MMUN2232LT1G is commonly used in low-voltage applications for switching and amplification.
1. Gate (G): This pin controls the MOSFET's switching operation. When a voltage is applied to the gate, it allows current to flow from the drain to the source.
2. Drain (D): This is the terminal where the load is connected. It is the path through which the current flows when the MOSFET is turned on.
3. Source (S): This pin is connected to the ground or negative voltage in a typical configuration. It completes the circuit and allows current to exit the device.
The MMUN2232LT1G is commonly used in low-voltage applications for switching and amplification.
Manufacturer
The manufacturer of the MMUN2232LT1G is NXP Semiconductors. NXP is a global semiconductor company that specializes in designing and manufacturing a wide range of electronic components, including microcontrollers, sensors, and RF (radio frequency) solutions. The company serves various industries such as automotive, industrial, internet of things (IoT), and mobile communications. NXP is known for its innovations in secure connectivity and processing solutions, playing a significant role in enabling smart and connected devices. The MMUN2232LT1G, specifically, is a dual N-channel MOSFET designed for use in various applications, contributing to the efficiency and performance of electronic systems.
Application
The MMUN2232LT1G is a dual N-channel MOSFET designed for various applications, primarily in power management and switching circuits. Its key application areas include:
1. Power Supply Circuits: Used in DC-DC converters and voltage regulation.
2. Motor Control: Employed in driving motors for robotics and automation.
3. Load Switching: Ideal for controlling high-current loads in consumer electronics.
4. Signal Switching: Utilized in low-noise amplifiers and general signal processing.
5. Lighting Control: Applicable in LED drivers and dimming circuits.
Its compact size and efficiency make it suitable for portable and space-constrained applications.
1. Power Supply Circuits: Used in DC-DC converters and voltage regulation.
2. Motor Control: Employed in driving motors for robotics and automation.
3. Load Switching: Ideal for controlling high-current loads in consumer electronics.
4. Signal Switching: Utilized in low-noise amplifiers and general signal processing.
5. Lighting Control: Applicable in LED drivers and dimming circuits.
Its compact size and efficiency make it suitable for portable and space-constrained applications.
Package
The MMUN2232LT1G is available in a small SOT-23 package type. This surface-mount device is designed for compact applications, providing efficiency and ease of integration into electronic circuits.
