Abbildungen dienen nur als Referenz
IC FLASH 256GBIT PAR 100TBGA
-
HerstellerMicron Technology Inc.
-
Herstellerteil #MT29F256G08CMCABH2-12:A
-
Paket TBGA-100
-
Auf Lager7364
365 Tage Qualitätsgarantie
7*24 Stunden-Servicegarantie
90-Tage Kundendienstgarantie
Originalproduktgarantie
Spezifikationen
| Attribut | Wert |
| Supplier | Micron Technology Inc. |
| Package / Case | Tray |
| Part Status | Obsolete |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NAND (MLC) |
| Memory Size | 256Gb (32G x 8) |
| Memory Interface | Parallel |
| Clock Frequency | 83 MHz |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | 0°C ~ 70°C (TA) |
| Mounting Type | Surface Mount |
Übersicht
Description
- Manufacturer: Micron Technology.
- Type: High-density NAND flash memory (NAND storage).
- Capacity and data bus: 256 Gbit total capacity with an 8-bit data bus (x8).
- Architecture: NAND flash organized into blocks and pages; supports page program, block erase, and wear leveling; requires ECC for reliability.
- Interface: Industry-standard NAND interface (timings/commands follow typical NAND flash conventions; specifics in the datasheet).
- Package/variant: The suffix CMCABH2-12:A encodes packaging, temperature range, and revision levels (exact meaning in the datasheet).
- Applications: Used in embedded storage, SSDs, and other consumer/storage devices.
- Important: Exact page size, block size, endurance, voltages, and timing parameters are revision- and device-specific; consult the MT29F256G08CMCABH2-12:A datasheet for precise specs.
Features
- Density: 256 Gb (32 GB) NAND flash
- Interface: x8 data bus; ONFI-compatible parallel NAND interface
- Page size: 4 KB main data page with a spare area
- Architecture: multi-plane organization for higher throughput and concurrent operations
- Reliability: built-in error management with on-die ECC support; supports host ECC
- Endurance: thousands of P/E cycles (MLC-type device typical)
- Operating voltage: standard 3.3 V I/O (device’s I/O interface)
- Temperature: industrial-grade operation (typical -40°C to 85°C)
- Bad block management and wear leveling for data integrity and longevity
- Packaging options: available in common NAND packages (e.g., FBGA/TSOP) suited for embedded systems
- Additional features: typical NAND features such as copy-back, programmable read-only modes, and standby power optimizations
Note: Exact numbers (e.g., ECC strength, exact spare size, precise voltage ranges, and temperature ranges) can vary by revision. For precise specifications, refer to the official Micron datasheet for this exact part number.
Pinout
- Function: 8‑bit parallel NAND flash memory with standard NAND interface.
- IO0–IO7: data I/O and address bytes during cycles
- CLE: Command Latch Enable
- ALE: Address Latch Enable
- CE#: Chip Enable
- WE#: Write Enable
- RE#: Read Enable
- WP#: Write Protect
- R/B#: Ready/Busy
- VCC/VSS: power and ground
- Other pins may be NC depending on the package.
Manufacturer
What kind of company: An American multinational semiconductor company that designs, manufactures, and sells memory and storage products (DRAM, NAND/NOR flash), and is one of the world’s largest memory makers.
Application
- Removable media: USB drives, SD/microSD cards
- Embedded storage in consumer electronics: cameras, camcorders, set-top boxes, TVs, game consoles
- Industrial/enterprise storage: data logging, rugged/industrial controllers, firmware storage
- Automotive/telematics applications: infotainment and onboard systems (where automotive-grade variants are used)
Note: exact use depends on grade and packaging of MT29F256G08CMCABH2-12:A; consult datasheet for endurance and operating conditions.