ADS1282HIPWR vs ADS1271IBPWR

Dieser detaillierte Vergleich von ADS1282HIPWR und ADS1271IBPWR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1271IBPWR and ADS1282HIPWR are both 24-bit delta-sigma ADCs in TSSOP-28 packages, but they differ fundamentally in resolution architecture, input configuration, and target application class. The ADS1271IBPWR is a single-channel wide-bandwidth converter with a fixed data rate up to 105 kSPS, while the ADS1282HIPWR is a dual-channel high-resolution seismic-grade converter with integrated PGA and up to 4 kSPS output. Because the two devices are not pin-compatible in function and require different external circuitry, supply arrangements, and digital interfacing, the ADS1282HIPWR cannot be used as a direct drop-in substitute for the ADS1271IBPWR without a full redesign.

Different channel architecture Different data rate class Different input front end Different application target

Parts at a glance

Part A

ADS1282HIPWR

Texas Instruments

Lifecycle
Active
Stock
5203 Stückzahl
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1271IBPWR

Texas Instruments

Lifecycle
Active
Stock
6728 Stückzahl
Package
TSSOP-16
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1271IBPWR ADS1282HIPWR Why it matters
Resolution (bits) 24 31 Higher resolution enables finer signal detail and lower quantization noise, which is critical for precision measurement and seismic-grade applications.
Maximum Sample Rate (SPS) 105k 4k Sample rate determines the bandwidth of signals that can be captured; the ADS1271 supports much wider bandwidth for high-speed data acquisition.
Number of Input Channels 1 (differential) 2 (differential, with mux) Channel count affects how many signal sources can be measured; the ADS1282 offers an input multiplexer for two differential inputs.
Architecture Delta-Sigma Delta-Sigma Both use delta-sigma conversion, but the ADS1282 is optimized for very high resolution at low speed while the ADS1271 targets wider bandwidth.
PGA / Gain Stage No integrated PGA Integrated PGA (1 to 64) An integrated PGA allows direct connection of low-level sensors without external amplification, simplifying the signal chain.
Supply Voltage (Analog) 5 V 5 V (analog), 3.3 V (digital) Supply requirements affect board-level power design and compatibility with surrounding logic and analog circuitry.
Interface SPI (serial) SPI (serial) Both use SPI, but timing and register maps differ, so firmware must be adapted when substituting one for the other.
Package TSSOP-16 (PW) TSSOP-28 (PW) Different package footprints and pin counts prevent direct drop-in replacement on an existing PCB layout.
Operating Temperature Range -40°C to +105°C -40°C to +85°C The wider temperature range of the ADS1271 suits harsher environments, while the ADS1282 covers standard industrial conditions.
Typical Application Focus Industrial measurement, vibration, data acquisition Seismic, energy exploration, high-resolution sensor systems Application focus indicates the intended noise/bandwidth trade-off and helps judge functional substitutability for a given design.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1282HIPWR ADS1271IBPWR
Part Status Active Active
Number of Bits 31 24
Sampling Rate (Per Second) 4k -
Number of Inputs 2 1
Input Type Differential Differential
Data Interface SPI SPI
Configuration ADC ADC
Number of A / D Converters 1 -
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 1.65V ~ 3.6V 1.65V ~ 3.6V
Features PGA -
Operating Temperature -40°C ~ 85°C -40°C ~ 105°C
Mounting Type Surface Mount -
Base Product Number ADS1282 -
Sampling Rate(Per Second) - 105k
Number of A/D Converters - 1

Frequently asked questions

What are the key architectural differences between the ADS1271IBPWR and ADS1282HIPWR?

The ADS1271IBPWR is a 24-bit, single-channel delta-sigma ADC with a fixed data rate up to 105 kSPS and a passband flat to 0.455 × fDATA. The ADS1282HIPWR is a 31-bit, single-channel delta-sigma ADC with a programmable data rate up to 4 kSPS and an on-chip programmable gain amplifier (PGA) with gains of 1, 2, 4, 8, 16, 32, and 64. The ADS1282 also integrates a low-noise PGA and supports a wider analog supply range, making it suited to high-resolution seismic and energy exploration applications.

Are the ADS1271IBPWR and ADS1282HIPWR pin-compatible?

No. The ADS1271IBPWR is supplied in a 20-pin TSSOP (PW) package, while the ADS1282HIPWR is supplied in a 28-pin TSSOP (PW) package. The two devices have different pin counts and pin functions, so they are not drop-in replacements and require different PCB land patterns.

How do the resolution and data rate specifications compare?

The ADS1271IBPWR provides 24-bit resolution with data rates up to 105 kSPS. The ADS1282HIPWR provides 31-bit resolution with a maximum data rate of 4 kSPS. The ADS1282 trades higher resolution and lower noise for a lower maximum output data rate, while the ADS1271 offers higher throughput at 24-bit resolution.

Does the ADS1282HIPWR include a PGA that the ADS1271IBPWR lacks?

Yes. The ADS1282HIPWR integrates a programmable gain amplifier with selectable gains of 1, 2, 4, 8, 16, 32, and 64, allowing direct connection of low-level sensors. The ADS1271IBPWR does not include an integrated PGA; it provides a fixed-gain differential input suitable for higher-level signals.

What are the supply voltage requirements for each device?

The ADS1271IBPWR operates from a 5 V analog supply (AVDD) and a 1.8 V to 3.3 V digital supply (DVDD). The ADS1282HIPWR operates from a 5 V analog supply (AVDD) and a 1.8 V to 3.3 V digital supply (DVDD), and additionally requires an analog supply for its internal circuitry. Designers should confirm exact supply ranges against the respective manufacturer datasheets before finalizing the power tree.

Which device is better suited for high-resolution seismic or energy exploration applications?

The ADS1282HIPWR is specifically designed for seismic and energy exploration systems, offering 31-bit resolution, an integrated PGA, and low-noise performance at data rates up to 4 kSPS. The ADS1271IBPWR, with 24-bit resolution and up to 105 kSPS, is better suited to higher-speed industrial measurement and vibration applications where throughput is prioritized over maximum resolution.

Can the ADS1271IBPWR and ADS1282HIPWR share the same digital interface?

Both devices provide a serial digital interface for output data, but the ADS1271IBPWR supports both SPI-compatible and frame-sync modes, while the ADS1282HIPWR uses an SPI-compatible interface with additional control registers for PGA and filter configuration. The interface protocols are similar but not identical, so firmware and host controller configuration must be adapted to each device.