ADS7843E
Burr Brown
- Lifecycle
- Active
- Stock
- 6691 Stückzahl
- Package
- SSOP-16
- Series
- Datenerfassung mit Touchscreen Controllern
Dieser detaillierte Vergleich von ADS7843E und ADS7841E/2K5G4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7843E and ADS7841E/2K5G4 are not functionally interchangeable despite sharing the same SSOP-16 footprint and 12-bit SAR architecture. The ADS7843E integrates a resistive touch-screen driver with an on-chip switch matrix and pen-interrupt output, whereas the ADS7841E/2K5G4 is a general-purpose 4-channel ADC without touch-screen control logic. Their serial interface timing, input configuration, and control-word formats differ, so a direct board-level swap is not supported without redesign.
Burr Brown
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841E/2K5G4 | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility in most digital systems. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges ensure the parts can operate in the same power domain. |
| Package / Mounting | SSOP-16 (surface mount) | SSOP-16 (surface mount) | Identical package and footprint allow physical board-level substitution. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Same temperature range means both suit the same environmental conditions. |
| Sampling Rate | 125 kSPS | 200 kSPS | Higher sampling rate in the ADS7841E allows faster signal acquisition, which may matter for high-speed applications. |
| Internal Reference | External reference required | External reference required | Both require an external reference, so the same reference circuit can be reused. |
| Power Consumption | Low power (approx. 500 µA at 5 V) | Low power (approx. 500 µA at 5 V) | Comparable power draw supports similar battery-powered or low-power designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841E/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touch screen controller with an integrated 12-bit ADC and on-chip drivers for touch panel excitation, while the ADS7841E/2K5G4 is a standalone 12-bit, 4-channel successive-approximation ADC without touch screen drive circuitry. The ADS7843E includes an internal reference and switches for panel biasing, whereas the ADS7841E/2K5G4 requires an external reference voltage and provides a standard SPI-compatible serial interface for general-purpose analog signal acquisition.
No. Although both devices are offered in similar small-outline packages, their pin functions differ. The ADS7843E dedicates pins to touch panel drive (X+, X-, Y+, Y-) and pen-interrupt output, while the ADS7841E/2K5G4 assigns those pins to additional analog input channels and reference connections. A direct drop-in replacement is not possible without PCB redesign and firmware changes.
Both devices use a serial interface compatible with SPI, QSPI, and Microwire, but the command and data formats differ. The ADS7843E uses an 8-bit control byte to select channel, power-down mode, and reference configuration, returning a 12-bit conversion result. The ADS7841E/2K5G4 uses a different control byte format to select one of four input channels and returns a 12-bit result. Firmware written for one device is not directly portable to the other.
Both the ADS7843E and the ADS7841E/2K5G4 provide 12-bit resolution. The ADS7843E is specified for a throughput rate of up to 125 kSPS when operating from a 2.7 V to 5 V supply. The ADS7841E/2K5G4 is specified for a 200 kSPS throughput rate. Exact timing and settling requirements should be confirmed against the respective manufacturer datasheets for the target supply voltage and reference configuration.
Both devices operate from a single supply in the range of 2.7 V to 5.25 V, making them suitable for 3 V and 5 V systems. The ADS7843E also includes an on-chip reference that is enabled or disabled via the control byte, while the ADS7841E/2K5G4 requires an external reference voltage applied to its VREF pin. Designers should verify the reference voltage limits and supply decoupling requirements in the respective datasheets.
The ADS7843E is purpose-built for 4-wire resistive touch screen digitizers, providing the panel drive switches, pen-interrupt detection, and ratiometric conversion needed for touch coordinate measurement. The ADS7841E/2K5G4 is a general-purpose 4-channel ADC suited to applications such as battery monitoring, sensor signal conditioning, and data acquisition where an external reference and multiple single-ended inputs are required. Selection should be based on whether touch panel drive circuitry is needed.
Both devices are commonly offered in 16-pin SSOP and 16-pin SOIC packages, depending on the specific orderable part number. The ADS7841E/2K5G4 suffix indicates a tape-and-reel packaging option in a specific package variant. Designers should confirm the exact package, pin count, and thermal characteristics from the manufacturer datasheet for the ordered part number before finalizing the PCB footprint.
Not directly. The ADS7843E can operate with its internal reference or an external reference, and its reference input is configured through the control byte. The ADS7841E/2K5G4 requires an external reference voltage on VREF and does not include an internal reference. Power supply decoupling and reference bypassing must be designed per each device's datasheet, and the reference source must meet the accuracy and drive requirements specified for the ADS7841E/2K5G4.