ADS7843E
Burr Brown
- Lifecycle
- Active
- Stock
- 6691 Stückzahl
- Package
- SSOP-16
- Series
- Datenerfassung mit Touchscreen Controllern
Dieser detaillierte Vergleich von ADS7843E und ADS7841ESG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7843E and ADS7841ESG4 are not functionally interchangeable despite sharing a similar 12-bit SAR architecture and 16-pin package family. The ADS7843E integrates a resistive touch-screen driver interface with differential channel switching, while the ADS7841ESG4 is a 4-channel single-ended ADC with a different serial control word and conversion timing. Pin functions, control register format, and analog input configuration differ, so a direct board-level swap is not supported without redesign.
Burr Brown
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841ESG4 | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility in most designs. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges ensure the parts can operate in the same power domain. |
| Package / Mounting | 16-SSOP (Surface Mount) | 16-SSOP (Surface Mount) | Identical package and footprint allow physical board-level interchangeability. |
| Sampling Rate | 125 kSPS | 200 kSPS | Higher sampling rate in the ADS7841ESG4 supports faster signal acquisition; a difference that may affect timing-critical designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings confirm suitability for the same environmental conditions. |
| Power Consumption (Typical) | Low power (approx. 500 µA at 5 V) | Low power (approx. 500 µA at 5 V) | Similar power draw means no change to thermal or battery-life budgets. |
| Reference Input | External reference | External reference | Both require an external reference, so the same reference circuit can be reused. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841ESG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touch screen controller with an integrated 12-bit ADC and on-chip drivers for touch panel excitation, while the ADS7841ESG4 is a standalone 12-bit, 4-channel successive-approximation ADC without touch screen control logic or panel drivers. The ADS7843E is intended for touch digitizer applications, whereas the ADS7841ESG4 is a general-purpose 4-channel ADC.
No. The ADS7843E is offered in a 16-pin SSOP package, and the ADS7841ESG4 is offered in a 16-pin QSOP package. Although both are 16-pin devices, the pin functions differ because the ADS7843E includes touch panel drive and sense pins (X+, X-, Y+, Y-, and PENIRQ) that the ADS7841ESG4 does not have. They are not pin-for-pin compatible.
No. The ADS7843E cannot be used as a direct drop-in replacement for the ADS7841ESG4. The ADS7843E is a touch screen controller with integrated panel drivers and a PENIRQ output, while the ADS7841ESG4 is a general-purpose 4-channel ADC. Their pin functions, package types, and control interfaces differ, so substitution requires design validation against the respective datasheets.
Both devices use a 12-bit successive-approximation register (SAR) ADC architecture. The ADS7843E provides 12-bit resolution for touch screen coordinate measurement, and the ADS7841ESG4 provides 12-bit resolution across its 4 analog input channels. Both are specified as 12-bit SAR converters in their respective manufacturer datasheets.
The ADS7843E is configured for 4-wire resistive touch screen panels, with dedicated X+, X-, Y+, and Y- drive/sense lines and a PENIRQ interrupt output. The ADS7841ESG4 provides 4 single-ended analog input channels (CH0 through CH3) or 2 differential input pairs, selectable via its digital control interface. The input configuration is therefore application-specific and not interchangeable.
Both devices use a serial digital interface for control and data transfer. The ADS7843E uses a serial interface to command touch screen conversions and read coordinate data, and it provides a PENIRQ output to signal pen contact. The ADS7841ESG4 uses a serial interface to select input channels and read conversion results. The command sets and control word formats are device-specific and are not identical.
Both devices are specified for single-supply operation in the 2.7 V to 5.25 V range per their manufacturer datasheets. Designers should confirm the exact supply and reference conditions in the respective datasheet before finalizing a design, as performance specifications are defined under specific operating conditions.
For a 4-wire resistive touch screen digitizer design, the ADS7843E is the appropriate choice because it integrates the panel drive and sense functions plus a pen-interrupt output. For general-purpose multi-channel analog signal acquisition, the ADS7841ESG4 is the appropriate choice because it provides 4 selectable input channels without touch screen-specific circuitry. Selection should be based on the verified requirements of the target application.