ADS7843E
Burr Brown
- Lifecycle
- Active
- Stock
- 6691 Stückzahl
- Package
- SSOP-16
- Series
- Datenerfassung mit Touchscreen Controllern
Dieser detaillierte Vergleich von ADS7843E und ADS7841ES/2K5 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7843E and ADS7841ES/2K5 are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7843E is a 4-wire resistive touch screen controller with an on-chip switch driver and pen-interrupt output, while the ADS7841ES/2K5 is a general-purpose 4-channel 12-bit ADC without touch screen control logic. Their interface behavior, channel configuration, and application role differ fundamentally, so substituting one for the other requires a full circuit redesign rather than a direct swap.
Burr Brown
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841ES/2K5 | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility with the same host controller bus. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges ensure the parts can operate in the same system power domain. |
| Package / Pin Count | 16-pin SSOP | 16-pin SSOP | Identical package and pin count enable board-level interchangeability without layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings confirm suitability for the same industrial environments. |
| Conversion Rate (max) | 125 kSPS | 200 kSPS | A higher sampling rate in the ADS7841ES/2K5 allows faster signal acquisition, which may matter for higher-bandwidth applications. |
| Internal Reference | No (external reference required) | No (external reference required) | Both require an external reference, so the same reference circuit can be reused. |
| Power Consumption (typical) | Low power (approx. 0.5 mW at 2.7 V) | Low power (approx. 0.9 mW at 5 V) | Power draw affects battery life and thermal budget in portable and embedded designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841ES/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touchscreen controller with an integrated 12-bit ADC and on-chip drivers for touchscreen panel excitation. The ADS7841ES/2K5 is a standalone 12-bit, 4-channel successive-approximation ADC with a serial interface, without integrated touchscreen drive circuitry. The ADS7843E is designed specifically for touchscreen digitizer applications, while the ADS7841ES/2K5 is a general-purpose ADC.
No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7841ES/2K5 is offered in a 16-pin SSOP package as well, but the pin functions differ because the ADS7843E includes touchscreen drive outputs (X+, X-, Y+, Y-) and a pen-interrupt output, whereas the ADS7841ES/2K5 provides four analog input channels (CH0–CH3) without touchscreen drive pins. Pin-to-pin substitution is not possible without verifying the pin function assignments in the respective datasheets.
No, not directly. The ADS7843E integrates the analog switches and drivers required to excite a 4-wire resistive touchscreen and includes a pen-interrupt output, while the ADS7841ES/2K5 lacks these touchscreen-specific functions. Replacing one with the other would require additional external circuitry and firmware changes, and the pin functions are not compatible.
Both devices provide 12-bit resolution. The ADS7843E supports a throughput rate of up to 125 kSPS. The ADS7841ES/2K5 supports a throughput rate of up to 200 kSPS. These figures should be confirmed against the specific manufacturer datasheet revision for the exact orderable part number.
Both devices operate from a single supply in the range of 2.7 V to 5.25 V, according to their respective manufacturer datasheets. Designers should verify the exact recommended operating conditions for the specific grade and package variant being used.
Both the ADS7843E and ADS7841ES/2K5 use a serial SPI-compatible interface for communication with a host microcontroller or processor. The ADS7843E additionally provides a pen-interrupt output to signal touch detection, which the ADS7841ES/2K5 does not provide.
No. The ADS7843E is intended for 4-wire resistive touchscreen digitizer applications, while the ADS7841ES/2K5 is a general-purpose 4-channel ADC suitable for data acquisition, industrial control, and sensor interface applications. Selection should be based on whether integrated touchscreen drive and pen-interrupt functions are required.