ADS8345E/2K5 vs ADS830EG4

Dieser detaillierte Vergleich von ADS8345E/2K5 und ADS830EG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS8345E/2K5 and ADS830EG4 are not functionally interchangeable. The ADS8345E/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial SPI/QSPI interface in a 20-pin SSOP package, while the ADS830EG4 is an 8-bit, single-channel pipelined ADC with a parallel output interface in a 20-pin SOIC package. The differences in resolution, channel count, output interface, and package footprint make direct substitution impractical without a complete redesign of the surrounding circuitry.

Different resolution Different channel count Different output interface Different package footprint

Parts at a glance

Part A

ADS8345E/2K5

Texas Instruments

Lifecycle
Active
Stock
3595 Stückzahl
Package
SSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS830EG4

Texas Instruments

Lifecycle
Active
Stock
7957 Stückzahl
Package
SSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8345E/2K5 ADS830EG4 Why it matters
Resolution 16 bit 8 bit Resolution determines the smallest signal change the ADC can distinguish; a 16-bit part offers far finer quantization than an 8-bit part, so they are not functionally interchangeable in precision applications.
Number of Input Channels 8 single-ended / 4 differential 1 single-ended Channel count defines how many signals can be digitized; the multi-channel ADS8345 suits multiplexed multi-sensor systems, while the single-channel ADS830 targets one high-speed signal path.
Sampling Rate 100 kSPS 60 MSPS Maximum sample rate sets the bandwidth of signals that can be captured; the ADS830 is roughly 600x faster, making it suitable for high-frequency/IF sampling where the ADS8345 cannot be used.
Architecture SAR (successive approximation) Pipeline Converter architecture affects latency, speed, and power trade-offs; SAR offers low latency and low power at moderate speed, while pipeline enables very high throughput at the cost of latency and power.
Interface SPI / serial (QSPI, Microwire, DSP compatible) Parallel (8-bit) The digital interface must match the host controller; a serial SPI device and a parallel-output device require different board routing and firmware, preventing drop-in substitution.
Supply Voltage 2.7 V to 5.25 V (analog and digital) 5 V (single supply) Supply voltage compatibility determines whether the part can operate in a given system rail; the wide-range ADS8345 supports low-voltage designs, whereas the ADS830 requires a 5 V rail.
Input Configuration Single-ended or differential (software selectable) Single-ended Differential inputs improve noise immunity and dynamic range; only the ADS8345 offers this flexibility, which matters for low-level or noisy signal environments.
Package SSOP-20 SOIC-20 Package footprint and pinout must match for board-level interchangeability; different package types require layout changes and cannot be directly swapped.
Typical Power Consumption Low power (approx. 1.5 mW at 100 kSPS, 5 V) Higher power (approx. 190 mW at 60 MSPS, 5 V) Power budget constrains portable and thermally sensitive designs; the low-power SAR part suits battery systems, while the high-speed pipeline part draws substantially more current.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8345E/2K5 ADS830EG4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits 16 8
Sampling Rate(Per Second) 100k 60M
Number of Inputs 4, 8 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR Pipelined
Reference Type External External, Internal
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary differences between the ADS8345E/2K5 and the ADS830EG4?

The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation register (SAR) analog-to-digital converter with a maximum sampling rate of 100 kSPS, while the ADS830EG4 is an 8-bit, single-channel pipeline ADC with a maximum sampling rate of 60 MSPS. They differ fundamentally in resolution, architecture, channel count, and speed.

What are the supply voltage requirements for each device?

The ADS8345E/2K5 operates from a single 2.7 V to 5.25 V analog and digital supply. The ADS830EG4 requires a 5 V analog supply and a separate 3 V to 5 V digital output supply.

What analog input configurations do these ADCs support?

The ADS8345E/2K5 supports eight single-ended inputs or four differential inputs, selectable via its input multiplexer. The ADS830EG4 provides a single-ended analog input with an internal reference and a flexible input range.

What digital interfaces do the ADS8345E/2K5 and ADS830EG4 use?

The ADS8345E/2K5 uses a serial SPI-compatible interface. The ADS830EG4 provides a parallel CMOS-compatible output bus for its 8-bit conversion results.

Are these two ADCs pin-compatible or footprint-compatible?

No. The ADS8345E/2K5 is supplied in a 20-pin SSOP package, while the ADS830EG4 is supplied in a 20-pin TSSOP package. Pin functions and PCB land patterns differ, so they are not direct drop-in replacements.

What are the typical applications for each converter?

The ADS8345E/2K5 is suited to multi-channel, medium-speed data acquisition such as industrial process control and portable instrumentation. The ADS830EG4 is intended for high-speed, single-channel signal digitization such as video processing, imaging, and communications receivers.

What are the specified operating temperature ranges for these devices?

Both the ADS8345E/2K5 and the ADS830EG4 are specified for the industrial temperature range of -40°C to +85°C.