ADS8345E/2K5 vs ADS8343EBG4

Dieser detaillierte Vergleich von ADS8345E/2K5 und ADS8343EBG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8345E/2K5 and ADS8343EBG4 are both 16-bit SAR analog-to-digital converters sharing a compatible serial interface and similar supply architecture, making the ADS8343EBG4 a viable functional replacement candidate for the ADS8345E/2K5 in many designs. However, the two devices differ in channel configuration and package footprint, so schematic and layout validation is required before substitution.

Channel Configuration Validation required
Resolution and Interface High match
Package Type Validation required
Supply Voltage Range High match

Parts at a glance

Part A

ADS8345E/2K5

Texas Instruments

Lifecycle
Active
Stock
3595 Stückzahl
Package
SSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS8343EBG4

Texas Instruments

Lifecycle
Active
Stock
4868 Stückzahl
Package
SSOP-16
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8345E/2K5 ADS8343EBG4 Why it matters
Resolution (bits) 16 16 Both are 16-bit ADCs, so resolution is equivalent and not a differentiator for substitutability.
Number of input channels 8 (single-ended) / 4 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many signals can be multiplexed into one ADC; the ADS8345 supports twice as many inputs.
Sampling rate (max) 100 kSPS 100 kSPS Throughput must meet the system's signal bandwidth; both parts offer the same maximum conversion rate.
Supply voltage (analog & digital) 2.7 V to 5.25 V 2.7 V to 5.25 V Supply range must match the system rail; identical ranges allow drop-in use across 3 V and 5 V designs.
Interface type SPI / QSPI / Microwire (serial) SPI / QSPI / Microwire (serial) Serial interface compatibility ensures the same host controller firmware and wiring can be reused.
Input type Single-ended and pseudo-differential Single-ended and pseudo-differential Input configuration affects how sensor signals are connected; matching types simplifies board redesign.
Package / pin count SSOP-20 (DBQ) SSOP-16 (DBQ) Different package pin counts mean the PCB footprint and pinout differ, so a direct drop-in replacement is not possible.
Operating temperature range -40 °C to +85 °C -40 °C to +85 °C Temperature range must cover the application environment; identical ratings mean equal environmental suitability.
Reference input External reference External reference Both require an external voltage reference, so the same reference circuit can be shared in a redesign.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8345E/2K5 ADS8343EBG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 16 16
Sampling Rate(Per Second) 100k 100k
Number of Inputs 4, 8 2, 4
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External External
Voltage - Supply, Analog 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital 2.7V ~ 3.6V, 5V 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS8345E/2K5 and ADS8343EBG4?

The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation ADC with a serial interface, supplied in a 20-pin SSOP package and provided on a 2,500-unit tape-and-reel. The ADS8343EBG4 is a 16-bit, 4-channel successive-approximation ADC with a serial interface, supplied in a 16-pin SSOP package in a tube/tray format. The primary differences are channel count (8 vs. 4) and package pin count (20 vs. 16).

Are the ADS8345E/2K5 and ADS8343EBG4 pin-compatible?

No. The ADS8345E/2K5 uses a 20-pin SSOP package, while the ADS8343EBG4 uses a 16-pin SSOP package. The different pin counts and pin assignments prevent direct pin-to-pin substitution without PCB redesign.

Do both devices share the same resolution and sampling architecture?

Yes. Both are 16-bit successive-approximation register (SAR) analog-to-digital converters with a serial (SPI-compatible) interface, and both operate from a single +2.7 V to +5.25 V supply, providing comparable resolution and conversion architecture.

How do the input channel counts differ between the two parts?

The ADS8345E/2K5 provides 8 single-ended input channels (or 4 differential pairs), while the ADS8343EBG4 provides 4 single-ended input channels (or 2 differential pairs). The channel count is the most significant functional difference between the two devices.

What is the significance of the /2K5 suffix on the ADS8345E/2K5?

The /2K5 suffix indicates the device is supplied in tape-and-reel packaging with 2,500 units per reel, which is suited to automated high-volume SMT assembly. The ADS8343EBG4, by contrast, is supplied in tube/tray packaging.

Can the ADS8343EBG4 be used as a drop-in replacement for the ADS8345E/2K5?

No. Because the ADS8343EBG4 has fewer input channels (4 vs. 8) and a different package footprint (16-pin vs. 20-pin SSOP), it cannot serve as a drop-in replacement. Any substitution requires verifying channel requirements, pinout, and PCB layout against the respective manufacturer datasheets.

Do both converters support the same supply voltage range and serial interface?

Yes. Both the ADS8345E/2K5 and ADS8343EBG4 operate from a single +2.7 V to +5.25 V supply and use a serial interface compatible with SPI, QSPI, and Microwire, allowing similar host-controller interfacing when the channel count and package constraints are accommodated.