ADS8345E/2K5
Texas Instruments
- Lifecycle
- Active
- Stock
- 3595 Stückzahl
- Package
- SSOP-20
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS8345E/2K5 und ADS8343EB/2K5 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS8343EB/2K5 is a viable functional replacement candidate for the ADS8345E/2K5 in many designs, as both are 16-bit SAR ADCs with similar resolution and reference architecture. However, the ADS8343EB offers a lower maximum sampling rate and a reduced input channel count, so the substitution requires validation against the system's throughput and multiplexing requirements before adoption.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS8343EB/2K5 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 16 bit | Both are 16-bit SAR ADCs, so resolution is identical and not a differentiator for substitutability. |
| Number of Input Channels | 8 single-ended / 4 differential | 4 single-ended / 2 differential | Channel count determines how many signals can be multiplexed into one ADC; the ADS8345 supports twice as many inputs. |
| Sampling Rate | 100 kSPS | 100 kSPS | Throughput is the same, so timing and bandwidth requirements are compatible between the two parts. |
| Supply Voltage (Analog and Digital) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Identical supply range means either device can drop into the same power rail design. |
| Interface | SPI-compatible serial (SPI/QSPI/Microwire) | SPI-compatible serial (SPI/QSPI/Microwire) | Same serial interface protocol allows reuse of the same digital host and firmware. |
| Input Type | Single-ended or differential (software selectable) | Single-ended or differential (software selectable) | Both support flexible input configurations, so signal conditioning can remain unchanged. |
| Package | 20-pin SSOP (DBQ) | 16-pin SSOP (DBQ) | Different pin counts and footprints mean the PCB layout must be redesigned; they are not drop-in replacements. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings ensure equivalent environmental robustness. |
| Reference Input | External reference | External reference | Both require an external voltage reference, so the reference circuit can be shared across designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS8343EB/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 4, 8 | 2, 4 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation ADC with a serial interface, while the ADS8343EB/2K5 is a 16-bit, 4-channel successive-approximation ADC with a serial interface. The primary differences are channel count (8 vs 4) and package type (SSOP-20 for the ADS8345E vs SSOP-16 for the ADS8343EB). Both operate from a single +2.7V to +5V supply and offer similar sampling rates.
No. The ADS8345E/2K5 is supplied in a 20-pin SSOP package, while the ADS8343EB/2K5 is supplied in a 16-pin SSOP package. The different pin counts and pin assignments mean they are not drop-in replacements for each other and require different PCB footprints.
Both the ADS8345E/2K5 and ADS8343EB/2K5 are 16-bit successive-approximation analog-to-digital converters. The ADS8345 offers a sampling rate of up to 100 kSPS, and the ADS8343 offers a sampling rate of up to 100 kSPS, per the respective Texas Instruments datasheets.
The ADS8345E/2K5 provides 8 single-ended inputs or 4 differential input pairs. The ADS8343EB/2K5 provides 4 single-ended inputs or 2 differential input pairs. Both devices support software-selectable input configurations via their serial interface.
Both devices operate from a single analog supply of +2.7V to +5V. They also feature a separate digital supply pin (VIO) that allows the digital interface to operate from +2.7V to +5V, enabling direct connection to lower-voltage logic.
Both the ADS8345E/2K5 and ADS8343EB/2K5 use a SPI-compatible serial interface with CS, DIN, DOUT, and DCLK signals. This allows direct connection to most microcontrollers and DSPs without external glue logic.
These 16-bit SAR ADCs are typically used in industrial process control, data acquisition systems, battery-powered instruments, medical instrumentation, and portable measurement equipment where moderate speed and high resolution are required.
Both the ADS8345E/2K5 and ADS8343EB/2K5 are specified for the industrial temperature range of -40°C to +85°C, as stated in the Texas Instruments datasheets.