ADS1210U vs ADS1201U/1K

Dieser detaillierte Vergleich von ADS1210U und ADS1201U/1K bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1201U/1K is a functionally compatible replacement candidate for the ADS1210U, sharing the same SOIC-24 footprint, 24-bit delta-sigma architecture, and wide operating temperature range. Designers should validate the differing output interface configuration and reference/supply arrangement before committing to a drop-in substitution in existing ADS1210U designs.

Package Type High match
Resolution High match
Output Interface Validation required
Supply Voltage Validation required

Parts at a glance

Part A

ADS1210U

Texas Instruments

Lifecycle
Active
Stock
5384 Stückzahl
Package
SOIC-8
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1201U/1K

Texas Instruments

Lifecycle
Active
Stock
9427 Stückzahl
Package
SOIC-16
Series
Datenerfassung von ADCs-DACs für besonderen Zweck

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1210U ADS1201U/1K Why it matters
Resolution (bits) 20 24 Higher resolution provides finer measurement granularity; the ADS1201 offers 4 more bits, enabling lower-noise, higher-precision conversions.
Architecture Delta-Sigma Delta-Sigma Both use delta-sigma modulation, so both are suited to low-frequency, high-resolution applications, but the specific modulator design affects noise and linearity performance.
Input Type Differential Differential Differential inputs reject common-mode noise; both parts share this, supporting similar sensor interfacing topologies.
Data Interface SPI / Serial Serial (SPI-compatible) Interface compatibility determines whether the part can drop into an existing digital bus; both use serial interfaces but with differing protocol details.
Supply Voltage 5 V (analog and digital) 5 V (analog and digital) Matching supply rails simplifies power design and allows direct substitution without regulator changes.
Package SOIC-18 SOIC-16 Different pin counts and footprints mean the parts are not drop-in replacements; PCB layout must be redesigned.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Identical industrial temperature ratings allow use in the same environmental conditions.
PGA / Gain Stage Integrated PGA (1–128) No integrated PGA An integrated PGA allows direct connection of low-level sensors; the ADS1201 requires external amplification, affecting system complexity and BOM.
Output Data Rate Up to ~19.5 kSPS Up to ~1.5 kSPS Data rate determines throughput; the ADS1210 supports faster sampling, while the ADS1201 trades speed for higher resolution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1210U ADS1201U/1K
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Last Time Buy Active
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 24 b
Sampling Rate(Per Second) 16k 1k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential -
Configuration PGA-ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External, Internal -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 5V -
Features PGA -

Frequently asked questions

What are the key architectural differences between the ADS1210U and the ADS1201U?

The ADS1210U is a 24-bit delta-sigma analog-to-digital converter with a programmable gain amplifier (PGA) and an SPI-compatible serial interface, housed in a 24-pin SOIC package. The ADS1201U is a 24-bit delta-sigma modulator that outputs a 1-bit data stream rather than fully decimated digital codes, and it is offered in a 24-pin SOIC package as well. The ADS1210U integrates the digital filter and provides complete conversion results, while the ADS1201U requires external digital filtering or a digital signal controller to process the modulator output.

Do the ADS1210U and ADS1201U share the same package and pinout?

Both devices are available in a 24-pin SOIC package, but they are not pin-for-pin interchangeable. The ADS1210U uses its pins for analog inputs, reference, clock, and SPI serial data lines, whereas the ADS1201U uses its pins for the modulator clock input and 1-bit data output. Designers must consult the respective datasheets for exact pin assignments before considering any board-level substitution.

What are the maximum output data rates for the ADS1210U and ADS1201U?

The ADS1210U supports programmable output data rates up to approximately 15.6 kSPS in its fastest mode, depending on the selected gain and filter settings. The ADS1201U, as a modulator, produces a 1-bit stream at a clock rate up to 10 MHz, and the effective output word rate depends on the external digital filter and decimation ratio implemented by the host system.

Which device is better suited for isolated signal acquisition?

The ADS1201U is generally preferred for isolated measurement systems because its 1-bit modulator output can be transmitted across a digital isolator with a single data line plus clock, simplifying galvanic isolation. The ADS1210U provides a complete SPI interface with multiple digital lines, which increases isolator channel count and complexity in isolated designs.

Can the ADS1210U and ADS1201U operate from the same analog supply voltage?

Both devices support a single +5 V analog supply in their standard configurations, with the ADS1210U also offering a +3 V operating mode. The ADS1201U is specified for +5 V operation. Designers should verify the exact supply range and reference requirements in the latest manufacturer datasheet for each device before sharing a common rail.

What is the difference in digital interface between the ADS1210U and ADS1201U?

The ADS1210U provides a complete SPI-compatible serial interface that outputs fully converted 24-bit results along with configuration and status registers. The ADS1201U outputs only a 1-bit modulated data stream synchronized to an external clock, with no on-chip decimation filter or register interface, so the host must perform all digital filtering and conversion processing.

Are the ADS1210U and ADS1201U drop-in replacements for each other?

No. Although both are 24-bit delta-sigma devices in 24-pin SOIC packages, they differ in function, pinout, and digital interface. The ADS1210U delivers decimated conversion results over SPI, while the ADS1201U delivers a raw 1-bit modulator stream. A direct drop-in replacement is not possible without redesigning the digital interface and signal processing chain.