ADS1210U
Texas Instruments
- Lifecycle
- Active
- Stock
- 5384 Stückzahl
- Package
- SOIC-8
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS1210U und ADS1252U/2K5G4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS1210U and ADS1252U/2K5G4 are both 24-bit delta-sigma ADCs, but they differ fundamentally in resolution architecture, interface protocol, package footprint, and reference/supply configuration, so the ADS1252U/2K5G4 cannot serve as a direct drop-in substitute for the ADS1210U without redesign and validation.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1252U/2K5G4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so resolution alone does not distinguish them for substitutability. |
| Maximum Sample Rate (SPS) | 10 | 40000 | The ADS1252 offers a far higher throughput, making it suitable for faster signal acquisition where the ADS1210 would be too slow. |
| Number of Input Channels | 1 (differential) | 1 (differential) | Both provide a single differential input, so channel count is not a differentiator. |
| Input Type | Differential | Differential | Differential inputs on both parts provide common-mode noise rejection for low-level sensor signals. |
| Interface | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying drop-in replacement at the digital interface level. |
| Supply Voltage (V) | 5 | 5 | Matching 5 V supply simplifies power-rail compatibility when substituting one part for the other. |
| Package | SOIC-18 | SOIC-8 | Different package footprints and pin counts mean the parts are not drop-in compatible on the same PCB layout. |
| PGA / Internal Gain | Yes (1 to 16) | No | The ADS1210's programmable gain amplifier allows direct connection of low-level sensors, while the ADS1252 requires external signal conditioning. |
| Operating Temperature Range (°C) | -40 to +85 | -40 to +85 | Identical industrial temperature ranges mean both are suitable for the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1252U/2K5G4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Last Time Buy | Discontinued at Digi-Key |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 16k | 40k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | PGA | - |
The ADS1210U is a 24-bit delta-sigma analog-to-digital converter with a programmable gain amplifier (PGA) and a flexible SPI-compatible serial interface, housed in a 24-pin SOIC package. The ADS1252U/2K5G4 is a 24-bit delta-sigma ADC with a fixed-gain, high-speed serial interface and is supplied in a 16-pin SOIC package. The ADS1210U offers programmable gain settings and a wider feature set, while the ADS1252U/2K5G4 is optimized for simpler, high-speed data acquisition with a fixed input range.
No. The ADS1210U is packaged in a 24-pin SOIC (wide-body), while the ADS1252U/2K5G4 is packaged in a 16-pin SOIC. The pin counts, pin functions, and package footprints differ, so they are not drop-in replacements for each other and require different PCB land patterns.
The ADS1210U supports programmable output data rates up to 15.6 kSPS depending on the gain and mode settings. The ADS1252U/2K5G4 supports a fixed output data rate of up to 41.7 kSPS. The ADS1252U/2K5G4 is therefore better suited for higher-speed sampling applications, while the ADS1210U offers flexibility in trading speed for resolution and gain.
No. The ADS1210U includes an on-chip programmable gain amplifier with selectable gains of 1, 2, 4, 8, and 16, allowing direct connection of low-level sensors. The ADS1252U/2K5G4 does not include a PGA; it has a fixed input range and requires external signal conditioning for low-level signals.
The ADS1210U operates from a single +5 V analog supply (with a +2.5 V reference typical) and supports a differential input range set by the reference and gain. The ADS1252U/2K5G4 operates from a +5 V analog supply and uses an external reference; its input range is defined by the reference voltage. Both devices require an external voltage reference for accurate conversion, and the reference specifications should be verified against the respective datasheets for the target design.
The ADS1210U is generally more suitable for low-level sensor interfacing because it integrates a programmable gain amplifier (up to gain 16) and supports a differential input, allowing small sensor signals to be amplified before conversion. The ADS1252U/2K5G4 lacks an internal PGA and is better suited to applications where the input signal is already conditioned to match its fixed input range.
No. The two devices differ in package pin count (24-pin vs 16-pin SOIC), pin functions, gain architecture, and maximum data rate. A direct replacement is not possible without redesigning the PCB layout, signal conditioning, and firmware to accommodate the different interface and input range of the ADS1252U/2K5G4.
The ADS1210U uses a flexible SPI-compatible serial interface with programmable word length and mode settings, supporting both master and slave operation. The ADS1252U/2K5G4 uses a high-speed, fixed-format serial interface designed for simple, high-throughput data readout. The interface protocols and timing requirements differ, so firmware must be adapted accordingly when comparing or migrating between the two devices.