ADS1210U
Texas Instruments
- Lifecycle
- Active
- Stock
- 5384 Stückzahl
- Package
- SOIC-8
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS1210U und ADS1252UG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS1210U and ADS1252UG4 are both 24-bit delta-sigma analog-to-digital converters, but they differ fundamentally in resolution architecture, interface protocol, package footprint, and reference configuration, so the ADS1252UG4 cannot serve as a direct drop-in substitute for the ADS1210U without redesign of the interface, layout, and external circuitry.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1252UG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so resolution alone does not distinguish them for substitutability. |
| Number of input channels | 1 (differential) | 1 (differential) | Both provide a single differential input, so channel count is equivalent for single-sensor applications. |
| Maximum data rate (SPS) | 10k | 41k | The ADS1252UG4 supports a much higher output rate, which matters for higher-bandwidth or faster-sampling applications. |
| Interface type | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying drop-in replacement at the digital interface level. |
| Supply voltage (analog) | 5 V | 5 V | Matching analog supply simplifies power-rail design when substituting one part for the other. |
| Package / mounting | 18-SOIC (surface mount) | 8-SOIC (surface mount) | Different package footprints and pin counts mean the parts are not drop-in compatible on the same PCB layout. |
| Input type | Differential | Differential | Both accept differential inputs, which is important for rejecting common-mode noise in precision measurement. |
| Operating temperature range | -40°C to +85°C | -40°C to +85°C | Identical industrial temperature ranges mean both suit the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1252UG4 |
|---|---|---|
| Part Status | Last Time Buy | Discontinued at Digi-Key |
| Number of Bits | 24 | 24 |
| Sampling Rate(Per Second) | 16k | 40k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | PGA | - |
The ADS1210U is a 24-bit delta-sigma ADC with a programmable gain amplifier (PGA) and a flexible input multiplexer, supporting differential inputs and a serial interface. The ADS1252UG4 is a 24-bit delta-sigma ADC with a fixed-gain, high-speed modulator and a simpler serial interface, optimized for high-speed data acquisition without an integrated PGA or input multiplexer.
No. The ADS1210U is offered in a 24-pin SOIC (DW) package, while the ADS1252UG4 is offered in a 16-pin SOIC (DW) package. The pin counts and pin functions differ, so they are not pin-compatible and cannot be dropped into the same PCB footprint.
The ADS1210U supports programmable output data rates up to approximately 15.6 kSPS depending on gain and mode settings. The ADS1252UG4 supports a fixed output data rate of up to 41 kSPS, making it better suited for higher-speed acquisition applications.
Both devices operate from a single 5 V analog supply. However, the ADS1210U also requires a digital supply that can range from 2.7 V to 5.25 V, while the ADS1252UG4 operates with a single 5 V supply for both analog and digital domains. Designers should verify supply rail requirements against the respective datasheets.
Only the ADS1210U includes an integrated programmable gain amplifier (PGA) with selectable gains of 1, 2, 4, 8, and 16. The ADS1252UG4 does not include a PGA; its input range is fixed, so external signal conditioning is required for low-level signals.
No. Differences in package pinout, data rate, PGA availability, input multiplexing, and digital interface timing prevent direct interchangeability. Any substitution requires a full review of the schematic, PCB layout, and firmware against the manufacturer datasheets.
The ADS1210U is suited for precision low-frequency measurement such as industrial process control, weigh scales, and temperature sensing where PGA and multiplexing are beneficial. The ADS1252UG4 is suited for higher-speed data acquisition such as vibration monitoring and medical instrumentation where a fixed high data rate is required.