ADS7809UB
Texas Instruments
- Lifecycle
- Active
- Stock
- 4394 Stückzahl
- Package
- SOIC-20
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS7809UB und ADS7800JU/1KE4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7809UB and ADS7800JU/1KE4 are both 12-bit successive-approximation ADCs, but they differ in resolution architecture, package footprint, and interface timing, so the ADS7800JU/1KE4 cannot be treated as a direct drop-in substitute for the ADS7809UB without board-level and firmware validation.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809UB | ADS7800JU/1KE4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 12 bit | Resolution determines the smallest analog increment the ADC can distinguish; a 16-bit device provides 16x finer quantization than a 12-bit device, directly affecting measurement accuracy and dynamic range. |
| Sampling Rate | 100 kSPS | 333 kSPS | Maximum throughput limits the highest signal frequency that can be digitized; the faster ADS7800 supports higher-bandwidth signals while the ADS7809 trades speed for resolution. |
| Input Type | Single-ended | Single-ended | Input configuration determines how the analog source must be connected; both are single-ended, so the same signal conditioning topology can generally be reused. |
| Supply Voltage | 5 V (single supply) | 5 V and -15 V (dual supply) | Supply requirements affect board-level power design; the ADS7809 runs from a single 5 V rail, while the ADS7800 requires an additional negative rail, complicating substitution. |
| Interface | Serial (SPI/QSPI compatible) | Parallel | The digital interface dictates how the ADC connects to the host processor; serial vs parallel interfaces are not pin- or protocol-compatible, requiring different firmware and layout. |
| Package | SOIC-28 | SOIC-24 | Package footprint and pin count must match for a drop-in replacement; differing pin counts and body sizes mean the PCB layout cannot be shared directly. |
| Operating Temperature Range | -40 °C to +85 °C | 0 °C to +70 °C | Temperature range determines suitability for industrial versus commercial environments; the wider range of the ADS7809 allows use in harsher conditions. |
| Integral Nonlinearity (INL) | ±1.5 LSB (max) | ±0.5 LSB (max) | INL measures deviation from an ideal transfer function; lower INL yields more accurate absolute measurements, and the specified LSB differs in absolute size due to differing resolution. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809UB | ADS7800JU/1KE4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 16 | 12 |
| Sampling Rate(Per Second) | 100k | 333k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | Internal |
| Voltage - Supply, Analog | 5V | 5V, -11.4V ~ 16.5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7809UB is a 16-bit successive-approximation ADC with a serial interface, while the ADS7800JU/1KE4 is a 12-bit successive-approximation ADC with a parallel interface. The ADS7809UB offers higher resolution (16-bit vs 12-bit) and a different digital interface, so they are not pin-for-pin or functionally interchangeable without design changes.
No. The ADS7809UB is offered in a 28-pin SOIC package, while the ADS7800JU/1KE4 is offered in a 24-pin SOIC package. The pin counts and pin functions differ, so PCB layouts are not directly compatible between the two devices.
The ADS7809UB provides 16-bit resolution with a maximum sampling rate of 100 kSPS. The ADS7800JU/1KE4 provides 12-bit resolution with a maximum sampling rate of 333 kSPS. The ADS7800JU/1KE4 therefore offers a higher throughput but lower resolution than the ADS7809UB.
The ADS7809UB uses a serial digital interface for data output, which reduces the number of required I/O lines. The ADS7800JU/1KE4 uses a parallel digital interface, providing 12-bit data output over a parallel bus. System designers must account for these interface differences when considering either part.
Both devices support bipolar analog input ranges of ±10 V and ±5 V, as well as a unipolar 0 V to 10 V range, configured via external connections. Designers should verify the exact input configuration against the respective manufacturer datasheets for their target application.
No. Because the two devices differ in resolution (16-bit vs 12-bit), package pin count (28-pin vs 24-pin), and digital interface (serial vs parallel), the ADS7809UB cannot be used as a drop-in replacement for the ADS7800JU/1KE4. Any substitution requires a redesign of the PCB and digital interface.
Both the ADS7809UB and the ADS7800JU/1KE4 are specified for the industrial temperature range of −40 °C to +85 °C. Designers should confirm the exact grade and temperature specification against the manufacturer datasheet for the specific orderable part number.