ADS7809UB vs ADS7805U/1KG4

Dieser detaillierte Vergleich von ADS7809UB und ADS7805U/1KG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7809UB and ADS7805U/1KG4 are both 16-bit successive-approximation ADCs offering comparable resolution and sampling performance, making the ADS7805U/1KG4 a viable functional candidate for the ADS7809UB in many designs. However, the two devices differ in package and pinout, analog input configuration, and interface timing, so a direct drop-in substitution is not possible without layout and firmware validation.

Resolution and Sampling Rate Validation required
Package and Pinout Not compatible
Analog Input Configuration Validation required
Digital Interface Timing Validation required

Parts at a glance

Part A

ADS7809UB

Texas Instruments

Lifecycle
Active
Stock
4394 Stückzahl
Package
SOIC-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS7805U/1KG4

Texas Instruments

Lifecycle
Active
Stock
5980 Stückzahl
Package
SOIC-28
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7805U/1KG4 Why it matters
Resolution 16 bit 16 bit Both are 16-bit ADCs, so resolution is identical and not a differentiator for substitutability.
Sampling Rate 100 kSPS 100 kSPS Throughput determines how fast the system can acquire signals; identical rates ease drop-in replacement.
Input Type Single-ended Single-ended Input configuration must match the signal source topology; both being single-ended means the same front-end design applies.
Supply Voltage 5 V (analog and digital) 5 V (analog and digital) Supply requirements dictate board-level power design; matching 5 V rails allow reuse of the same power circuitry.
Interface Serial (SPI/QSPI compatible) Parallel The digital interface determines how the ADC connects to the host processor; serial vs parallel requires different pin routing and firmware.
Package 28-pin SOIC 28-pin SOIC Package footprint must match for physical board compatibility; identical SOIC packages allow the same PCB land pattern.
Operating Temperature Range -40°C to +85°C -40°C to +85°C Temperature range affects suitability for industrial environments; matching ranges mean equivalent environmental robustness.
Reference Type Internal reference Internal reference On-chip reference simplifies design and reduces external components; both having internal references supports similar system architectures.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7805U/1KG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 16 16
Sampling Rate(Per Second) 100k 100k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -25°C ~ 85°C

Frequently asked questions

What are the key differences between the ADS7809UB and the ADS7805U/1KG4?

The ADS7809UB is a 16-bit successive-approximation ADC, while the ADS7805U/1KG4 is a 12-bit successive-approximation ADC. Both are pin-compatible members of the Burr-Brown (Texas Instruments) ADS78xx family, but they differ in resolution, linearity, and dynamic performance specifications. The ADS7809UB offers 16-bit resolution with ±2 LSB INL (max), whereas the ADS7805U/1KG4 offers 12-bit resolution with ±1 LSB INL (max).

Are the ADS7809UB and ADS7805U/1KG4 pin-compatible?

Yes. Both devices are offered in the same 28-pin SOIC (DW) package and share the same pinout as members of the ADS780x family. This allows a common PCB footprint, but designers must verify that resolution-dependent timing and performance requirements are met before substituting one for the other.

What is the sampling rate of each device?

Both the ADS7809UB and the ADS7805U/1KG4 are specified for a maximum throughput of 100 kSPS. The internal successive-approximation architecture and conversion timing are similar across the family, so the maximum sampling rate is the same for both parts.

Do both parts support the same analog input range?

Yes. Both devices provide a bipolar ±10 V analog input range using the internal reference and on-chip resistor network. The input configuration and reference architecture are common to the ADS780x family, so the analog front-end design can be shared between the two parts.

How do the DC accuracy specifications compare?

The ADS7809UB is a 16-bit converter with a maximum INL of ±2 LSB and no missing codes guaranteed to 16 bits. The ADS7805U/1KG4 is a 12-bit converter with a maximum INL of ±1 LSB and no missing codes guaranteed to 12 bits. The higher-resolution ADS7809UB therefore provides finer quantization and tighter absolute accuracy in terms of LSB, but its LSB size is 16 times smaller than that of the 12-bit device.

Are the digital interface and control signals identical?

Yes. Both devices use the same parallel digital interface with identical control signals (CS, R/C, BYTE, and BUSY) and the same data bus width configuration. The interface timing is defined for the same 100 kSPS maximum throughput, so the same microcontroller or DSP interface logic can be used with either part.

What are the power supply requirements for these ADCs?

Both the ADS7809UB and the ADS7805U/1KG4 operate from a single +5 V analog supply and a +5 V digital supply, with power consumption in the same family-typical range. Designers should consult the respective datasheets for exact quiescent current and power dissipation limits, which are specified separately for each device.

Can the ADS7805U/1KG4 be used as a drop-in replacement for the ADS7809UB in an existing design?

Because the two parts are pin-compatible and share the same interface and analog input range, the ADS7805U/1KG4 can physically populate the same footprint. However, it provides only 12-bit resolution versus 16 bits, so any design requiring 16-bit accuracy or no-missing-code performance at 16 bits cannot use the 12-bit device as a functional equivalent. The substitution must be validated against the system's resolution and accuracy requirements.