ADS7809UB
Texas Instruments
- Lifecycle
- Active
- Stock
- 4394 Stückzahl
- Package
- SOIC-20
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS7809UB und ADS7804UE4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7809UB and ADS7804UE4 are both 12-bit successive-approximation ADCs from Texas Instruments with parallel output interfaces, making them functionally comparable in many designs. However, they differ in package footprint, conversion speed, and analog input configuration, so the ADS7804UE4 should be treated as a candidate replacement only after validating package compatibility, timing margins, and input signal conditioning against the target application requirements.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809UB | ADS7804UE4 | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 12 bit | Resolution determines the smallest measurable signal step; a 16-bit ADC provides 16x finer quantization than a 12-bit ADC, so these parts are not functionally interchangeable in precision applications. |
| Sampling Rate | 100 kSPS | 100 kSPS | Throughput must meet the system's acquisition bandwidth; both parts share the same 100 kSPS maximum, so timing budgets are compatible. |
| Input Type | Single-ended | Single-ended | Input configuration must match the sensor or signal chain topology; both accept single-ended inputs, so front-end design is compatible. |
| Interface | Serial (SPI/QSPI compatible) | Parallel | The digital interface dictates the host connection and PCB routing; serial vs parallel output means the two parts cannot be dropped into the same socket without redesign. |
| Supply Voltage | 5 V | 5 V | Supply voltage must match the board's power rail; both operate from a single 5 V supply, so power design is compatible. |
| Reference Type | Internal | Internal | An internal reference simplifies the design and reduces external components; both include an on-chip reference, so no external reference is required for either. |
| Package / Case | 28-SOIC | 28-SOIC | Package footprint determines PCB layout compatibility; both use a 28-pin SOIC, so the land pattern is shared. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range must cover the application environment; both are rated for the industrial -40 °C to +85 °C range. |
| INL (Integral Nonlinearity) | ±1.5 LSB (max) | ±0.5 LSB (max) | INL defines absolute accuracy deviation from an ideal transfer function; the tighter INL of the 12-bit part reflects its different resolution class and affects measurement accuracy budgets. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809UB | ADS7804UE4 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 12 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7809UB is a 16-bit successive-approximation ADC with a serial (SPI-compatible) interface, while the ADS7804UE4 is a 12-bit successive-approximation ADC with a parallel interface. The ADS7809UB offers higher resolution (16-bit vs 12-bit) and a serial output, whereas the ADS7804UE4 provides a parallel data bus. Both are single-channel, bipolar-input ADCs from Texas Instruments in a 28-pin SOIC package.
Both devices are offered in a 28-pin SOIC (DW) package, but their pin functions differ because the ADS7809UB uses a serial interface and the ADS7804UE4 uses a parallel interface. They are not pin-for-pin drop-in replacements; the digital interface pins and control signals differ, so PCB layout and firmware must be adapted accordingly.
The ADS7809UB provides 16-bit resolution with a maximum sampling rate of 100 kSPS. The ADS7804UE4 provides 12-bit resolution with a maximum sampling rate of 100 kSPS. Both are successive-approximation register (SAR) ADCs with integrated sample-and-hold circuitry.
Both the ADS7809UB and ADS7804UE4 feature bipolar input ranges of ±10 V, ±5 V, and 0 V to 5 V (software or pin selectable depending on configuration). The input range is configured via control pins, allowing flexibility for industrial signal acquisition.
The ADS7809UB uses a serial interface compatible with SPI and similar synchronous serial protocols, outputting data on a single serial data line with frame synchronization. The ADS7804UE4 uses a parallel interface with a 12-bit-wide data bus plus control signals (CS, R/C, BYTE, etc.) for direct connection to parallel microcontrollers or DSPs.
No. Because the ADS7809UB is 16-bit with a serial interface and the ADS7804UE4 is 12-bit with a parallel interface, they are not directly interchangeable. A redesign of the digital interface, firmware, and possibly the analog front-end scaling is required. Substitution should only be attempted after validating all specifications against the Texas Instruments datasheets.
Both devices target industrial data acquisition, process control, instrumentation, and medical systems requiring bipolar input ranges. The ADS7809UB suits designs needing 16-bit precision with minimal digital I/O (serial), while the ADS7804UE4 suits systems with a parallel bus and 12-bit resolution requirements.
Both the ADS7809UB and ADS7804UE4 operate from a +5 V analog supply and a +5 V digital supply (dual-supply configuration). Typical power consumption is on the order of 100 mW for each device under nominal conditions. Exact limits should be confirmed in the respective Texas Instruments datasheets.