ADS7809UB
Texas Instruments
- Lifecycle
- Active
- Stock
- 4394 Stückzahl
- Package
- SOIC-20
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS7809UB und ADS7800KU/1K bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS7809UB and ADS7800KU/1K are both 12-bit successive-approximation ADCs, but they differ in resolution architecture, package footprint, and interface timing, so the ADS7800KU/1K cannot be used as a direct drop-in substitute for the ADS7809UB without design changes and revalidation.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7809UB | ADS7800KU/1K | Why it matters |
|---|---|---|---|
| Resolution | 16 bit | 12 bit | Resolution determines the smallest analog increment the ADC can distinguish; a 16-bit part offers 16x finer quantization than a 12-bit part, so they are not functionally interchangeable in precision applications. |
| Sampling Rate | 100 kSPS | 333 kSPS | Maximum throughput limits the bandwidth of signals that can be digitized; the ADS7800 supports faster sampling, which matters for higher-frequency or multiplexed acquisition systems. |
| Input Type | Single-ended | Single-ended | Input configuration affects how the signal source must be connected and whether differential rejection is available; both are single-ended here, but this must be confirmed for drop-in compatibility. |
| Supply Voltage | 5 V (single supply) | 5 V and -5 V (dual supply) | Supply requirements dictate board-level power design; the ADS7800 needs a negative rail while the ADS7809 runs from a single 5 V supply, so power architecture must change for substitution. |
| Interface | Serial (SPI/QSPI compatible) | Parallel | The digital interface determines how the converter connects to the host processor; serial versus parallel output requires different pin count, timing, and firmware, preventing direct drop-in replacement. |
| Package | SOIC-28 | SOIC-24 | Package footprint and pin count must match for PCB compatibility; differing package sizes mean the parts cannot share the same land pattern. |
| Integral Nonlinearity (INL) | ±1.5 LSB (max) | ±0.5 LSB (max) | INL describes deviation from an ideal transfer function and directly affects accuracy; the tighter INL of the ADS7800 in its own resolution class reflects different precision grades between the two parts. |
| Operating Temperature Range | -40 °C to +85 °C | 0 °C to +70 °C | Temperature range determines suitability for industrial versus commercial environments; the wider range of the ADS7809 allows use in harsher conditions where the ADS7800 grade would not be specified. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7809UB | ADS7800KU/1K |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 12 |
| Sampling Rate(Per Second) | 100k | 333k |
| Number of Inputs | 1 | 1 |
| Input Type | Single Ended | Single Ended |
| Data Interface | SPI, DSP | Parallel |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External, Internal | Internal |
| Voltage - Supply, Analog | 5V | 5V, -11.4V ~ 16.5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS7809UB is a 16-bit successive-approximation register (SAR) analog-to-digital converter with a serial data interface, while the ADS7800KU/1K is a 12-bit SAR ADC that provides a parallel data interface. The ADS7809UB offers higher resolution (16 bits versus 12 bits) and a different digital communication scheme, making them non-interchangeable in terms of data bus architecture.
No. The ADS7809UB is supplied in a 28-pin SOIC package, whereas the ADS7800KU/1K is supplied in a 24-pin PDIP or SOIC package depending on the grade. The pin counts and pin functions differ, so PCB land patterns and socket compatibility are not interchangeable between the two devices.
Both devices are specified for a +5 V analog supply. However, the ADS7809UB includes an internal reference and operates with a 5 V supply for both analog and digital sections, while the ADS7800KU/1K also uses a +5 V supply but requires attention to its reference and input range configuration. Always confirm the exact supply and reference requirements from the respective datasheets before designing a common rail.
The ADS7809UB provides a maximum throughput of 100 kSPS. The ADS7800KU/1K is specified for a maximum throughput of 333 kSPS. Therefore, the ADS7800KU/1K offers a higher sampling rate but at 12-bit resolution, while the ADS7809UB trades speed for 16-bit resolution.
The ADS7809UB supports software-selectable input ranges of ±10 V, ±5 V, 0 V to 10 V, and 0 V to 5 V. The ADS7800KU/1K provides a fixed input range of ±10 V. Designs requiring flexible input ranges should account for this difference when considering either part.
Not directly. The ADS7809UB uses a serial interface (SPI/QSPI-compatible) for data output, while the ADS7800KU/1K provides a 12-bit parallel output with associated control lines. A microcontroller or FPGA design must be adapted to the respective interface type; a simple drop-in replacement is not possible without interface logic changes.
Yes. Both the ADS7809UB and the ADS7800KU/1K integrate an internal reference voltage, reducing external component count. However, the reference specifications, drift, and initial accuracy should be verified in the respective datasheets for precision-critical applications.
The ADS7809UB is specified over the industrial temperature range of −40 °C to +85 °C. The ADS7800KU/1K is specified over the commercial temperature range of 0 °C to +70 °C. Designs requiring extended temperature operation should favor the ADS7809UB or verify the exact grade suffix of the ADS7800 variant.