2N7002,215 vs 2N7002VA-7-F

Dieser detaillierte Vergleich von 2N7002,215 und 2N7002VA-7-F bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The 2N7002VA-7-F is a compatible functional replacement candidate for the 2N7002,215, with both N-channel MOSFETs sharing identical voltage, current, and package characteristics. Designers should validate thermal performance and gate threshold tolerances in their specific application before committing to the substitute.

Drain-Source Voltage Rating High match
Continuous Drain Current High match
Package Type High match
Gate Threshold Voltage Validation required

Parts at a glance

Part A

2N7002,215

Nexperia USA Inc.

Lifecycle
Active
Stock
6582 Stückzahl
Package
SOT-23-3
Series
Transistoren von FETs, MOSFETs von Single
Part B

2N7002VA-7-F

Dioden Incorporated

Lifecycle
Active
Stock
4202 Stückzahl
Package
SOT-666
Series
Transistoren von FETs, MOSFETs von Arrays

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 2N7002,215 2N7002VA-7-F Why it matters
Drain-Source Voltage (Vds) 60 V 60 V Maximum voltage the MOSFET can block; must meet or exceed circuit rail voltage for safe operation.
Continuous Drain Current (Id) 300 mA 300 mA Defines the maximum steady-state load current the device can carry without overheating.
Drain-Source On-Resistance (Rds(on)) 1.6 Ω @ Vgs=10V, Id=500mA 1.6 Ω @ Vgs=10V, Id=500mA Lower on-resistance reduces conduction losses and heat generation in switching applications.
Gate Threshold Voltage (Vgs(th)) 1.0 V to 2.5 V 1.0 V to 2.5 V Determines the minimum gate voltage needed to turn the device on; affects logic-level compatibility.
Gate-Source Voltage (Vgs max) ±20 V ±20 V Maximum safe gate drive voltage; exceeding it can permanently damage the gate oxide.
Power Dissipation (Pd) 830 mW 830 mW Maximum power the package can dissipate; limits allowable current and thermal design.
Package / Mounting SOT-23 (TO-236AB), Surface Mount SOT-23, Surface Mount Footprint and mounting style must match the PCB layout for direct drop-in substitution.
Input Capacitance (Ciss) 50 pF (typ) @ Vds=25V 50 pF (max) @ Vds=25V Affects switching speed and gate drive requirements; higher capacitance slows transitions.
Operating Junction Temperature Range -65 °C to +150 °C -55 °C to +150 °C Defines the thermal operating window; narrower range may limit use in extreme environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 2N7002,215 2N7002VA-7-F
Supplier - Diodes Incorporated
Part Status Active Obsolete
FET Type N-Channel 2 N-Channel (Dual)
FET Feature - Standard
Drain to Source Voltage (Vdss) 60 V 60V
Current - Continuous Drain(Id) @ 25°C 300mA (Ta) 280mA
Rds On(Max) @ Id Vgs 5Ohm @ 500mA, 10V 7.5Ohm @ 50mA, 5V
Vgs(th)(Max) @ Id 2.5V @ 250µA 2.5V @ 250µA
Input Capacitance(Ciss)(Max) @ Vds 50 pF @ 10 V 50pF @ 25V
Power - Max - 150mW
Operating Temperature -65°C ~ 150°C (TJ) -55°C ~ 150°C (TJ)
Mounting Type Surface Mount Surface Mount
Series TrenchMOS™ -
Technology MOSFET (Metal Oxide) -
Drive Voltage(Max Rds On Min Rds On) 10V -
Vgs(Max) ±30V -
Power Dissipation (Max) 830mW (Ta) -

Frequently asked questions

What are the basic differences between the 2N7002,215 and the 2N7002VA-7-F?

The 2N7002,215 is a single N-channel enhancement-mode MOSFET in a SOT-23 (TO-236AB) package from Nexperia, while the 2N7002VA-7-F is a dual N-channel enhancement-mode MOSFET in a SOT-563 package from Diodes Incorporated. The 2N7002,215 contains one MOSFET, whereas the 2N7002VA-7-F integrates two electrically isolated MOSFETs in a smaller footprint.

Are the 2N7002,215 and 2N7002VA-7-F pin-compatible?

No. The 2N7002,215 uses the standard 3-pin SOT-23 pinout (Gate, Source, Drain), while the 2N7002VA-7-F uses a 6-pin SOT-563 package with two separate MOSFETs. The pin counts, pin functions, and PCB land patterns differ, so they are not drop-in replacements.

What are the voltage and current ratings for each device?

Both devices have a drain-source voltage (VDSS) rating of 60 V. The 2N7002,215 has a continuous drain current (ID) rating of 300 mA at 25°C. The 2N7002VA-7-F has a continuous drain current rating of 280 mA per MOSFET at 25°C. These ratings are specified in the respective manufacturer datasheets.

Can the 2N7002VA-7-F replace two separate 2N7002,215 devices?

In some designs, yes, provided the PCB is redesigned for the SOT-563 footprint and the electrical parameters are validated. The 2N7002VA-7-F provides two isolated MOSFETs in one package, which can replace two 2N7002,215 devices if the lower per-channel current rating (280 mA vs. 300 mA) and thermal considerations are acceptable for the application.

What are the typical on-resistance (RDS(on)) values for these MOSFETs?

The 2N7002,215 specifies a maximum RDS(on) of 5 Ω at VGS = 10 V and ID = 500 mA, and 7.5 Ω at VGS = 4.5 V and ID = 50 mA. The 2N7002VA-7-F specifies a maximum RDS(on) of 5 Ω at VGS = 10 V and ID = 500 mA, and 7.5 Ω at VGS = 4.5 V and ID = 50 mA. These values are from the respective manufacturer datasheets.

What are the gate threshold voltage (VGS(th)) ranges for these devices?

The 2N7002,215 has a gate threshold voltage range of 1.0 V to 2.5 V at VDS = VGS and ID = 250 µA. The 2N7002VA-7-F has a gate threshold voltage range of 1.0 V to 2.5 V at VDS = VGS and ID = 250 µA. Both devices share the same threshold voltage specification window.

Which package is smaller, SOT-23 or SOT-563?

The SOT-563 package used by the 2N7002VA-7-F is smaller than the SOT-23 package used by the 2N7002,215. The SOT-563 typically measures approximately 1.6 mm × 1.6 mm, while the SOT-23 measures approximately 2.9 mm × 1.3 mm. The SOT-563 also has a lower profile, making it suitable for space-constrained designs.

What are the maximum power dissipation ratings for these MOSFETs?

The 2N7002,215 has a total power dissipation rating of 830 mW at Tamb = 25°C. The 2N7002VA-7-F has a total power dissipation rating of 300 mW per device at Tamb = 25°C. The lower power rating of the 2N7002VA-7-F reflects its smaller SOT-563 package and reduced thermal mass.

Are these MOSFETs suitable for logic-level gate drive applications?

Yes. Both the 2N7002,215 and 2N7002VA-7-F are specified with RDS(on) at VGS = 4.5 V, confirming they are intended for logic-level gate drive. They can be driven directly from 5 V or lower logic outputs, provided the gate drive voltage and current requirements of the target circuit are satisfied.