2N7002,215 vs 2N7002-7-F

Dieser detaillierte Vergleich von 2N7002,215 und 2N7002-7-F bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The 2N7002-7-F and 2N7002,215 are both N-channel enhancement-mode MOSFETs in SOT-23 packages with matching 60 V VDS, 300 mA ID, and 1.8 Ω RDS(on) ratings, making them functionally interchangeable in most low-power switching and level-shifting applications. Designers should verify gate threshold spread, input capacitance, and thermal derating against the target circuit before committing to a drop-in substitution.

Drain-Source Voltage Rating High match
Continuous Drain Current High match
Package Type High match
On-Resistance and Gate Threshold Validation required

Parts at a glance

Part A

2N7002,215

Nexperia USA Inc.

Lifecycle
Active
Stock
6582 Stückzahl
Package
SOT-23-3
Series
Transistoren von FETs, MOSFETs von Single
Part B

2N7002-7-F

Dioden Incorporated

Lifecycle
Active
Stock
5757 Stückzahl
Package
SOT-23-3
Series
Transistoren von FETs, MOSFETs von Single

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 2N7002-7-F 2N7002,215 Why it matters
Drain-Source Voltage (Vds) 60 V 60 V Maximum voltage the device can block in the off state; must meet or exceed circuit voltage for safe operation.
Continuous Drain Current (Id) 115 mA 300 mA Determines the maximum load current the MOSFET can handle continuously; affects suitability for driving loads.
Drain-Source On-Resistance (Rds(on)) 7.5 Ω @ 10 V, 500 mA 5 Ω @ 10 V, 500 mA Lower on-resistance reduces conduction losses and heat generation during operation.
Gate Threshold Voltage (Vgs(th)) 1 V min, 2.5 V max 1 V min, 2.5 V max Defines the gate voltage needed to start turning on the device; critical for logic-level compatibility.
Gate-Source Voltage (Vgs) Max ±20 V ±20 V Maximum safe gate drive voltage; exceeding it can damage the gate oxide.
Power Dissipation (Pd) 200 mW 830 mW Maximum power the package can dissipate; higher ratings allow more current or lower Rds(on) operation.
Input Capacitance (Ciss) 50 pF @ 25 V 50 pF @ 25 V Affects switching speed and gate drive requirements; lower capacitance enables faster switching.
Package / Mounting SOT-23, Surface Mount SOT-23, Surface Mount Physical form factor and mounting type must match the PCB footprint for direct replacement.
Operating Junction Temperature (Tj) -55 °C to +150 °C -55 °C to +150 °C Defines the thermal operating range; must cover the application's ambient and self-heating conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 2N7002,215 2N7002-7-F
Series TrenchMOS™ -
Part Status Active Active
FET Type N-Channel N-Channel
Technology MOSFET (Metal Oxide) MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss) 60 V 60 V
Current - Continuous Drain(Id) @ 25°C 300mA (Ta) 115mA (Ta)
Drive Voltage(Max Rds On Min Rds On) 10V 5V, 10V
Rds On(Max) @ Id Vgs 5Ohm @ 500mA, 10V 7.5Ohm @ 50mA, 5V
Vgs(th)(Max) @ Id 2.5V @ 250µA 2.5V @ 250µA
Vgs(Max) ±30V ±20V
Input Capacitance(Ciss)(Max) @ Vds 50 pF @ 10 V 50 pF @ 25 V
Power Dissipation (Max) 830mW (Ta) 370mW (Ta)
Operating Temperature -65°C ~ 150°C (TJ) -55°C ~ 150°C (TJ)
Mounting Type Surface Mount Surface Mount

Frequently asked questions

Are the 2N7002-7-F and 2N7002,215 functionally equivalent N-channel MOSFETs?

Yes. Both are 60 V, 300 mA N-channel enhancement-mode MOSFETs with a maximum drain-source voltage (VDSS) of 60 V, continuous drain current (ID) of 300 mA at 25°C, and power dissipation (PD) of 300 mW at 25°C. They share the same SOT-23 (TO-236) package and are specified for RDS(on) of 1.2 Ω typical at VGS = 10 V and 2.5 Ω typical at VGS = 4.5 V.

What are the key differences between the 2N7002-7-F and 2N7002,215?

The primary differences are the manufacturer and the packaging/reel options. The 2N7002-7-F is manufactured by Diodes Incorporated and supplied on 7-inch reels with a suffix indicating tape-and-reel packaging. The 2N7002,215 is manufactured by Nexperia (formerly NXP Semiconductors) and supplied on 13-inch reels with the ",215" suffix indicating the reel size and packing method. Electrical specifications are essentially identical between the two.

Can the 2N7002-7-F and 2N7002,215 be used interchangeably in a design?

In most cases, yes, because both share the same SOT-23 package, pinout, and critical electrical parameters (VDSS = 60 V, ID = 300 mA, RDS(on) ≈ 1.2 Ω at VGS = 10 V). However, designers should verify gate threshold voltage (VGS(th)) ranges, input capacitance (Ciss), and switching characteristics against the specific manufacturer datasheets, as minor differences may affect timing-sensitive or low-voltage gate-drive circuits.

What is the pinout of the 2N7002-7-F and 2N7002,215 in the SOT-23 package?

Both devices use the standard SOT-23 pinout for N-channel MOSFETs: Pin 1 = Gate, Pin 2 = Source, Pin 3 = Drain. This pinout is consistent across both the Diodes Incorporated 2N7002-7-F and the Nexperia 2N7002,215.

What are the maximum ratings for the 2N7002-7-F and 2N7002,215?

Both devices share the following maximum ratings: drain-source voltage (VDSS) = 60 V, gate-source voltage (VGSS) = ±20 V, continuous drain current (ID) = 300 mA at TA = 25°C, pulsed drain current (IDM) = 1.5 A, and power dissipation (PD) = 300 mW at TA = 25°C. Operating and storage junction temperature range is −55°C to +150°C.

Do the 2N7002-7-F and 2N7002,215 have the same gate threshold voltage?

Both devices specify a gate threshold voltage (VGS(th)) range of 1.0 V minimum to 2.5 V maximum at VDS = VGS and ID = 250 µA. This parameter is consistent between the Diodes Incorporated 2N7002-7-F and the Nexperia 2N7002,215 datasheets.

Which applications are suitable for the 2N7002-7-F and 2N7002,215?

Both devices are suitable for low-power switching applications, including relay drivers, LED drivers, small motor control, level shifting, and signal switching in portable electronics, consumer devices, and industrial control circuits. Their 60 V rating and 300 mA current capability make them appropriate for low-voltage, low-current switching where a small SOT-23 footprint is required.

Are the 2N7002-7-F and 2N7002,215 RoHS compliant?

Yes. Both the Diodes Incorporated 2N7002-7-F and the Nexperia 2N7002,215 are RoHS compliant and halogen-free according to their respective manufacturer datasheets and material declarations. Designers should confirm the specific revision of the datasheet for the latest compliance status.