ADS1259IPWR vs ADS1208IPWR

Dieser detaillierte Vergleich von ADS1259IPWR und ADS1208IPWR bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1259IPWR and ADS1208IPWR are not drop-in replacements for one another. Although both are single-channel delta-sigma analog-to-digital converters in a TSSOP-20 package, they differ fundamentally in resolution, output interface, and modulator architecture, so the ADS1208IPWR cannot be substituted directly for the ADS1259IPWR without redesigning the digital interface and signal chain.

Different output interface Different resolution Different converter architecture Different data rate capability

Parts at a glance

Part A

ADS1259IPWR

Texas Instruments

Lifecycle
Active
Stock
6414 Stückzahl
Package
TSSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1208IPWR

Texas Instruments

Lifecycle
Active
Stock
7626 Stückzahl
Package
TSSOP-16
Series
Datenerfassung von ADCs-DACs für besonderen Zweck

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1259IPWR ADS1208IPWR Why it matters
Resolution (bits) 24 16 Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device.
Architecture Delta-Sigma (low-speed, high-resolution) Delta-Sigma modulator (current-shunt oriented) The converter architecture dictates noise shaping, bandwidth, and the type of signal chain the part is designed to serve.
Output Interface SPI (serial) Digital modulator bitstream (1-bit) The output format determines how the host or downstream filter must interface with the device; these two are not directly interchangeable.
Input Type Differential analog voltage input Differential current-shunt input The intended input signal type affects whether the part can be dropped into a given sensing circuit without additional conditioning.
Supply Voltage 5 V analog supply (with separate digital supply) 5 V single supply Supply requirements affect board-level power design and whether the part is compatible with the existing rail architecture.
Package TSSOP-20 TSSOP-16 Package and pin count affect PCB footprint and layout; different packages are not footprint-compatible.
Typical Application Precision industrial measurement / sensor digitization Motor control / current sensing The target application indicates the intended signal chain and helps assess functional substitutability.
Data Rate / Bandwidth Class Low-speed, high-resolution conversion Modulator output suitable for high-speed current-loop control Conversion speed versus resolution trade-off determines suitability for precision measurement versus fast control loops.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1208IPWR
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Obsolete
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) 14k 40k
Data Interface SPI Serial
Voltage Supply Source - Analog and Digital
Voltage - Supply - 2.7V ~ 5.5V, 4.5V ~ 5.5V
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential, Single Ended -
Configuration ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 2.7V ~ 5.25V -
Features PGA -

Frequently asked questions

What are the primary functional differences between the ADS1259IPWR and ADS1208IPWR?

The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise programmable gain amplifier, while the ADS1208IPWR is a 16-bit, 10-MHz delta-sigma modulator intended for isolated current sensing and motor control applications. The ADS1259 integrates a full ADC signal chain, whereas the ADS1208 outputs a modulated bitstream requiring external digital filtering.

Do the ADS1259IPWR and ADS1208IPWR share the same package and pinout?

No. The ADS1259IPWR is supplied in a 20-pin TSSOP (PW) package, and the ADS1208IPWR is supplied in a 16-pin TSSOP (PW) package. The pin counts and pin functions differ, so they are not pin-to-pin compatible and cannot be interchanged on the same PCB land pattern.

What are the resolution and output data rate specifications for each device?

The ADS1259IPWR provides 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1208IPWR provides 16-bit resolution as a delta-sigma modulator with a clock input up to 10 MHz, producing a 1-bit modulated output stream that is decimated externally to achieve the effective 16-bit result.

Which device is better suited for isolated current-sense applications?

The ADS1208IPWR is designed specifically for isolated current sensing, such as shunt-based motor drive and power monitoring, because its modulator output can be passed through a digital isolator. The ADS1259IPWR is a complete ADC with an SPI interface and is intended for direct precision measurement rather than isolated modulator-based signal chains.

What digital interface does each converter provide?

The ADS1259IPWR provides an SPI-compatible serial interface for configuration and data readout. The ADS1208IPWR provides a single-bit delta-sigma modulator output (DATA and CLK), which requires an external digital filter or microcontroller decimation stage rather than a standard register-based serial protocol.

Can the ADS1259IPWR and ADS1208IPWR operate from the same supply voltage?

They have different supply requirements. The ADS1259IPWR uses an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 2.7 V to 5 V. The ADS1208IPWR operates from a single 5 V supply. Designers must verify exact supply rails against the respective manufacturer datasheets before considering any common-supply design.

Are these two parts direct substitutes for one another in an existing design?

No. Because they differ in resolution, output format, package pin count, interface type, and intended application, the ADS1259IPWR and ADS1208IPWR are not direct substitutes. Any replacement would require redesign of the PCB land pattern, digital interface, filtering, and signal-chain architecture, validated against the manufacturer datasheets.