ADS1259IPWR
Texas Instruments
- Lifecycle
- Active
- Stock
- 6414 Stückzahl
- Package
- TSSOP-20
- Series
- Datenerfassung mit Analog to Digital Converters (ADC)
Dieser detaillierte Vergleich von ADS1259IPWR und ADS1208IPWRG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.
Replacement verdict
The ADS1259IPWR and ADS1208IPWRG4 are not drop-in replacements for each other. The ADS1259IPWR is a 24-bit delta-sigma ADC with an SPI interface in a TSSOP-20 package, while the ADS1208IPWRG4 is a 16-bit delta-sigma modulator with a serial CMOS output in a TSSOP-16 package. Their differing resolution, output interface, channel configuration, and package footprint require full design validation before any substitution can be considered.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1259IPWR | ADS1208IPWRG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit converter offers far finer measurement granularity than a 16-bit one. |
| Architecture | Delta-Sigma (Delta-Sigma) | Delta-Sigma (Delta-Sigma) | Both use delta-sigma modulation, which provides high resolution and low noise for precision measurement applications. |
| Number of Input Channels | 1 (single-ended/differential) | 1 (differential) | Channel count and input configuration determine how many signals can be measured and whether differential sensing is supported. |
| Sampling Rate (max) | 14 kSPS | 10 kSPS | Maximum sample rate sets the bandwidth of signals the converter can capture; higher rates suit faster-changing inputs. |
| Interface | SPI | SPI | The digital interface must match the host controller; both use SPI, simplifying drop-in compatibility at the system level. |
| Supply Voltage | 5 V (analog), 2.7–5.25 V (digital) | 5 V (analog), 2.7–5.5 V (digital) | Supply voltage compatibility ensures the part operates correctly within the system's power rails. |
| Package / Mounting | TSSOP-20 (surface mount) | TSSOP-16 (surface mount) | Package footprint and pin count affect PCB layout and whether the parts are physically interchangeable. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | The temperature range defines the environments in which the device can reliably operate. |
| Input Type | Differential / single-ended | Differential | Input configuration affects noise immunity and how sensor signals are wired to the converter. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1259IPWR | ADS1208IPWRG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 14k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 2.7V ~ 5.5V, 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 1 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
| Features | PGA | - |
The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise programmable gain amplifier, designed for high-resolution DC and low-frequency measurement. The ADS1208IPWRG4 is a 16-bit, 10-MHz second-order delta-sigma modulator with an integrated driver for current measurement via shunt resistors, intended for isolated and motor-control applications. They differ fundamentally in resolution, output format (digital filter output vs. modulator bitstream), and target application.
No. Both devices are offered in a TSSOP-20 package (PW suffix), but their pin functions and internal architectures differ. The ADS1259IPWR provides a complete ADC with SPI interface, reference inputs, and PGA, while the ADS1208IPWRG4 provides a modulator output (MDAT/MCLK) with driver and shunt-related pins. Pin assignments are not interchangeable, and PCB layouts must be designed separately for each device.
No. The ADS1259IPWR outputs parallel digital conversion results via an SPI-compatible interface, whereas the ADS1208IPWRG4 outputs a 1-bit modulator data stream requiring an external digital filter (e.g., sinc filter) to reconstruct the conversion result. The signal chain, clocking, and host interface are different, so a direct drop-in replacement is not possible without redesign.
The ADS1259IPWR provides 24-bit resolution with a maximum data rate of 14.4 kSPS. The ADS1208IPWRG4 provides 16-bit resolution with a modulator clock up to 10 MHz, yielding an oversampled 1-bit output stream that is filtered externally to achieve the effective 16-bit result. The two devices are not directly comparable on a single resolution/data-rate metric because their output formats differ.
The ADS1208IPWRG4 is specifically designed for current measurement using shunt resistors, with an integrated driver and a modulator output that can be galvanically isolated via a digital isolator before filtering. The ADS1259IPWR is a general-purpose high-resolution ADC without an integrated shunt driver or modulator output, making it less suitable for isolated current-sense signal chains. Selection should be validated against the specific isolation and accuracy requirements.
No. The ADS1259IPWR operates from an analog supply (AVDD) of 4.75 V to 5.25 V and a digital supply (DVDD) of 2.7 V to 5.25 V. The ADS1208IPWRG4 operates from a single 5 V supply (4.5 V to 5.5 V) for its analog and digital functions. Power-supply design and decoupling must be tailored to each device's datasheet requirements.
The ADS1259IPWR provides an SPI-compatible serial interface for configuration and reading conversion results. The ADS1208IPWRG4 provides a modulator data output (MDAT) and modulator clock (MCLK) interface, which requires an external digital filter (typically implemented in an FPGA, MCU, or dedicated sinc filter) to produce numeric conversion results. The host interface architectures are therefore fundamentally different.