ADS1259IPWR vs ADS1230IPWG4

Dieser detaillierte Vergleich von ADS1259IPWR und ADS1230IPWG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1259IPWR and ADS1230IPWG4 are both 24-bit delta-sigma ADCs, but they differ fundamentally in resolution architecture, data rate, interface, and package, so the ADS1230IPWG4 cannot serve as a drop-in substitute for the ADS1259IPWR without redesign and validation.

Different data rate Different interface type Different package footprint Different input architecture

Parts at a glance

Part A

ADS1259IPWR

Texas Instruments

Lifecycle
Active
Stock
6414 Stückzahl
Package
TSSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1230IPWG4

Texas Instruments

Lifecycle
Active
Stock
6107 Stückzahl
Package
TSSOP-16
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1259IPWR ADS1230IPWG4 Why it matters
Resolution (bits) 24 20 Higher resolution provides finer measurement granularity; a 24-bit ADC can resolve smaller signal changes than a 20-bit device.
Maximum Sample Rate (SPS) 14400 80 Sample rate determines how fast the ADC can capture changing signals; the ADS1259 supports much higher throughput for faster measurements.
Number of Input Channels 1 (single-ended) 1 (differential) Input configuration affects how the sensor connects; differential inputs reject common-mode noise while single-ended suits ground-referenced signals.
Interface Type SPI SPI Both use SPI, but the ADS1259 offers a more flexible register-based SPI interface versus the simpler read-only interface of the ADS1230.
Supply Voltage (Analog) 4.75 V to 5.25 V 2.7 V to 5.3 V Supply range determines compatibility with the system power rail; the ADS1230 supports lower-voltage operation down to 2.7 V.
Package Type TSSOP-20 TSSOP-16 Package footprint and pin count affect PCB layout and drop-in compatibility; the two devices are not pin-compatible.
Operating Temperature Range -40 °C to +105 °C -40 °C to +85 °C Wider temperature range allows operation in harsher environments; the ADS1259 supports higher ambient temperatures.
Input Type / PGA No integrated PGA Integrated PGA (gain 1 or 128) An integrated PGA allows direct connection of low-level sensors like bridge transducers without external amplification.
Typical Power Consumption ~13 mW ~5 mW Power consumption affects thermal budget and battery life; the ADS1230 is better suited to low-power applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1230IPWG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 24 20
Sampling Rate(Per Second) 14k 80
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration ADC PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 2.7V ~ 5.3V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.3V
Features PGA PGA
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C

Frequently asked questions

What are the key architectural differences between the ADS1259IPWR and ADS1230IPWG4?

The ADS1259IPWR is a 24-bit, 14.4 kSPS delta-sigma ADC with a programmable gain amplifier (PGA) and a serial peripheral interface (SPI), housed in a TSSOP-20 package. The ADS1230IPWG4 is a 20-bit, 80 SPS delta-sigma ADC with an integrated PGA and a two-wire serial interface, housed in a TSSOP-16 package. The ADS1259 offers higher resolution and faster data rates, while the ADS1230 is optimized for low-speed, low-power weigh-scale applications.

Are the ADS1259IPWR and ADS1230IPWG4 pin-to-pin compatible?

No. The ADS1259IPWR uses a TSSOP-20 package, while the ADS1230IPWG4 uses a TSSOP-16 package. They have different pin counts and pin functions, so they are not pin-to-pin compatible and cannot be directly substituted on the same PCB footprint.

Which device offers a higher maximum data rate?

The ADS1259IPWR supports data rates up to 14.4 kSPS, whereas the ADS1230IPWG4 supports a fixed data rate of 80 SPS. The ADS1259 is therefore suitable for higher-speed measurement applications, while the ADS1230 targets slow, high-resolution weigh-scale systems.

How do the resolution and effective number of bits compare between these two ADCs?

The ADS1259IPWR is a 24-bit ADC, and the ADS1230IPWG4 is a 20-bit ADC. The ADS1259 provides higher nominal resolution, which can translate to better effective number of bits (ENOB) in low-noise, low-speed configurations, but actual performance depends on gain, data rate, and circuit design as specified in the respective datasheets.

Do both devices include a programmable gain amplifier (PGA)?

Yes. Both the ADS1259IPWR and ADS1230IPWG4 integrate a programmable gain amplifier. The ADS1259 PGA supports gains of 1 to 128, and the ADS1230 PGA supports gains of 1, 2, 64, and 128, as documented in their respective manufacturer datasheets. The available gain settings differ, so gain selection must be verified for each application.

What are the supply voltage and power consumption differences between the ADS1259IPWR and ADS1230IPWG4?

The ADS1259IPWR operates from an analog supply of 5 V (with a digital supply of 2.7 V to 5.25 V) and typically consumes about 13 mW at 5 V. The ADS1230IPWG4 operates from a single 2.7 V to 5.3 V supply and typically consumes about 1.5 mW in normal operation, with a low-power standby mode. The ADS1230 is generally lower power, while the ADS1259 offers higher speed and resolution.

Which device is more suitable for battery-powered weigh-scale designs?

The ADS1230IPWG4 is generally more suitable for battery-powered weigh-scale designs because it is optimized for low-speed, low-power operation with a typical supply current in the low hundreds of microamperes and a fixed 80 SPS output rate. The ADS1259IPWR offers higher speed and resolution but typically consumes more power, making it better suited to higher-throughput or higher-resolution systems where power is less constrained.

Can the ADS1230IPWG4 be used as a drop-in replacement for the ADS1259IPWR in an existing design?

No. The two devices differ in package (TSSOP-16 vs TSSOP-20), pinout, resolution (20-bit vs 24-bit), maximum data rate (80 SPS vs 14.4 kSPS), gain settings, and supply requirements. A drop-in replacement is not possible; any substitution requires a new PCB layout and firmware changes validated against the manufacturer datasheets.