ADS1259IPWR vs ADS1224IPWTG4

Dieser detaillierte Vergleich von ADS1259IPWR und ADS1224IPWTG4 bietet wertvolle Einblicke in deren Spezifikationen und Hauptmerkmale. Wir gehen ausführlich auf wichtige Faktoren ein, darunter RoHS-Konformität, REACH-Status, Serie, Montageart, Gehäusetyp und weitere relevante Eigenschaften. Die übersichtliche Darstellung der Unterschiede vereinfacht die Komponentenauswahl und erleichtert Ihnen die Wahl der optimalen Lösung für Ihre Anwendung.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS1259IPWR and ADS1224IPWTG4 are both 24-bit delta-sigma analog-to-digital converters offering comparable resolution and similar serial interface architecture, making the ADS1259IPWR a plausible functional substitute for the ADS1224IPWTG4 in many precision measurement applications. However, the two devices differ in package footprint, input channel configuration, and sample rate capability, so designers must validate board layout, input multiplexing requirements, and timing performance before committing to a direct substitution.

Resolution Validation required
Package Type Validation required
Input Channel Configuration Validation required
Sample Rate Validation required

Parts at a glance

Part A

ADS1259IPWR

Texas Instruments

Lifecycle
Active
Stock
6414 Stückzahl
Package
TSSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)
Part B

ADS1224IPWTG4

Texas Instruments

Lifecycle
Active
Stock
4125 Stückzahl
Package
TSSOP-20
Series
Datenerfassung mit Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1259IPWR ADS1224IPWTG4 Why it matters
Resolution (bits) 24 24 Both are 24-bit delta-sigma ADCs, so resolution alone does not differentiate them for substitutability.
Number of input channels 1 (single-ended) 4 (differential/multiplexed) Channel count determines how many signal sources can be measured; the ADS1224 supports multiple inputs while the ADS1259 is single-channel.
Maximum sample rate (SPS) 14.4k 240 Sample rate affects achievable signal bandwidth and throughput; the ADS1259 is far faster, which matters for dynamic or high-speed measurements.
Input type Single-ended Differential Differential inputs reject common-mode noise and are preferred for low-level sensor signals, while single-ended suits simpler referenced measurements.
Interface SPI SPI Both use SPI, so host microcontroller compatibility is similar for either device.
Supply voltage (analog) 5 V (analog), 2.7–5.25 V (digital) 2.7–5.5 V Supply requirements affect board-level power design and whether the part can drop into an existing rail scheme.
Package TSSOP-20 TSSOP-20 Matching package and pin count simplifies PCB layout substitution, though pinout must still be verified.
Internal PGA No Yes An internal PGA allows direct connection of low-amplitude sensors without external amplification, affecting front-end complexity.
Operating temperature range -40°C to +105°C -40°C to +85°C The wider temperature range of the ADS1259 suits harsher environments, which can be a deciding factor in industrial applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1224IPWTG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits 24 24
Sampling Rate(Per Second) 14k 240
Number of Inputs 1 2
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration ADC MUX-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 2.7V ~ 5.5V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.5V
Features PGA Temperature Sensor
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C

Frequently asked questions

What are the primary differences between the ADS1259IPWR and ADS1224IPWTG4?

The ADS1259IPWR is a 24-bit, 14.4 kSPS delta-sigma ADC with a programmable gain amplifier (PGA) and SPI interface, housed in a TSSOP-20 package. The ADS1224IPWTG4 is a 24-bit, 240 SPS delta-sigma ADC with an integrated input multiplexer and PGA, offered in a TSSOP-20 package. The ADS1259 targets higher-speed precision measurement, while the ADS1224 targets low-speed, low-power sensor applications.

Are the ADS1259IPWR and ADS1224IPWTG4 pin-compatible?

No. Although both devices are packaged in a TSSOP-20, their pin functions and assignments differ per the respective Texas Instruments datasheets. They are not pin-compatible and cannot be interchanged on the same PCB land pattern without redesign.

What are the maximum sample rates of the ADS1259IPWR and ADS1224IPWTG4?

The ADS1259IPWR supports data rates up to 14.4 kSPS in its high-speed mode. The ADS1224IPWTG4 supports data rates up to 240 SPS. The ADS1259 is therefore suited to higher-throughput precision measurements, while the ADS1224 is intended for low-frequency sensor digitization.

Do both devices include a programmable gain amplifier (PGA)?

Yes. Both the ADS1259IPWR and ADS1224IPWTG4 integrate a PGA. The ADS1259 provides selectable gain settings for direct connection of low-level signals, and the ADS1224 also includes a PGA with selectable gains to accommodate small sensor outputs. Refer to the respective datasheets for exact gain ranges and configurations.

What digital interfaces do the ADS1259IPWR and ADS1224IPWTG4 use?

Both devices use an SPI-compatible serial interface for configuration and data readout. The ADS1259IPWR provides SPI communication for register access and conversion data, and the ADS1224IPWTG4 likewise uses an SPI interface. Verify timing and mode requirements in the respective Texas Instruments datasheets before implementation.

Which device is better suited for low-power battery-operated sensor systems?

The ADS1224IPWTG4 is generally better suited for low-power, low-speed sensor systems due to its lower sample rate and correspondingly lower power consumption profile. The ADS1259IPWR, with its higher 14.4 kSPS throughput, is intended for applications requiring faster precision conversion. Final power budgeting should be based on the supply current and mode specifications in each datasheet.

Can the ADS1224IPWTG4 directly replace the ADS1259IPWR in an existing design?

No. The two devices differ in sample rate, pin assignments, register maps, and configuration, despite sharing a 24-bit delta-sigma architecture and TSSOP-20 package. A direct replacement is not possible; any substitution requires schematic, layout, and firmware changes validated against the target datasheet.